Full Automatic Generator Sets

Descripción del producto

Product introduction

Three terms remote monitoring and controlling, automatic control series products

Tech parameters

 



A,Manual control panel(standard configuration)provide the basic start/stop with following configurations and functions:

1,start/stop controller

2,three phase current meter

3,voltage meter and selection switch

4,frequency meter/water temperature gauge/oil pressure gauge/ time recorder/voltage meter of battery

5,emergency stop

6,Alarm function: over speed, high water temperature, low oil pressure, charging failure

7,Protection function: low oil pressure, high water temperature, over speed, emergency stop and other protections.



B,Self-start control panel under electric supply off(voltage loss). Besides the configuration and function of standard manual control panel, this control panel appends remote control interface. 

1,automatic /stop/manual function selection

2,time-delay relay for starting (**5seconds, adjustable)

3,time-delay relay for stopping(0~**0seconds,adjustable)

4,three times self starting time relay

5,city electric charger

6,Added alarm function:low/over speed, output voltage failure, start failure, high water level alarm, emergency stop

7,Added protection function: low/over speed, output voltage failure(over voltage, under voltage, over current), start failure,

C,Full-automatic remote monitoring and controlling panel.

1,LCD screen display the operating steps, status, failure and operating parameters.

2,RS**2/**5 interface, remote monitoring and controlling, remote measuring, remote signaling.

3,Gen sets protection, stop and alarm automatically in the following circumstances: start failure, over speed, low speed, high water temperature, low oil pressure, no signal from speed sensor, charging failure, etc.

D,Automatic load switching screen(ATS)

1,four pole, mechanical/electric interlock switch.

2,indicator of electric supply, electricity generating and loading status.

3,automatic/manual selector switch.

4,acid pickling, phosphorization, spray-paint treatment of the screen.

5,Reserved space for and output cable.

6,auto switching time no more than 7second, (adjustable)

E,Unattended operation. If client require, the independent full automatic control panel can provide independent control cabinet which unify the self-start control function and automatic load switching function, operate conveniently, and suitable for centralized management of all electrical equipment.

F,Parallel operation control panel

1,manual/half-automatic/full-automatic two sets or more sets parallel operation

2,Many sets parallel to power grid, more reliable on power supply.

3,centralized dispatching, distributes load automatically, easy to maintain and repair.

4,More economical efficiency, can operate the sets according to actual requirements, saving oil.

5,More flexible for the future, can add more equipments to meet the requirement of adding load.  

 

 

Detailed function of automatic generator sets

1.       Self-start and self-operation function.

Automatic/manual ATS switch on the control cabinet, the switch should be on automatic at emergency mode. When city power fails or lower than the *0% of rated voltage, the generator sets will start automatically within *5s, and if continuous 3 times start failure, it will alarm sound and light.

2.       Self-stop function

During the automatical operation, if the city power recovers and confirmed for 5 seconds, the generator sets will stop operation automatically. First cut off the load, and the city power will recover to work, at this time, the generators sets will work at idle speed, and 3mins later, it will stop. During the 3 mins, if the city power fails again, the generator sets will return to work again.

3.       Self-protection function

If the generator sets get 3 starting failures, the control cabinet will lock the system and alarm sound and light. During the operation, if faults like high oil temperature, low oil pressure, over speed, under frequency, under voltage, etc, the generator sets will emergency shutdown.

Self-charging function

The generator sets will charge the battery automatically no matter by the city power or by itself. The charging system choose switching power, it will charge in two steps, first when the battery capacity is lower, it will charge at constant current of 6ADC, and when the voltage of the battery arrive *6.5v, it will change to charge at constant voltage, and keeps floating charge .The charging will stop when battery is full.

4.       Manual operation

The controlling system of the generator sets is interlocking designed by manual and automatic. When the generator sets operate under manual mode, it can control the start and stop, high/low speed, alarm test, alarm reset, breaker on/off of self-generating, etc. Emergency shutdown will work in both states.  This only under emergency state.