FRP grating car wash machine cutting and processing installation

Descripción del producto

Depending on the size and installation requirements for reasonable grille cutting and processing, to the greatest economic benefits without affecting the intrinsic properties of the grid. Resin-coated cutting end face machining required to ensure its corrosion resistance is not affected.
A. Cutting:
Straight cut: FRP grating can use ceramic disc or emery disc cutter cutting site, and even ordinary hacksaw can be used for cutting.
Curve cutting: grille openings, such as arc cutting arc metal cutting blade can be used to install an electric saw or hacksaw.
B. Drilling:
*2mm above the ordinary drill twist drill holes available. Machining holes can hand portable electric hole processing machines or general hand drill drilling.
C. Polished:
Available portable angle grinder for grinding, grinding machines, ordinary file and sandpaper. Note: a This material is not turning and tapping. b. arbitrary cut will not change the mechanical properties of the grid, but will not fall apart and cause other consequences.
2. Safety measures:
Before cutting, operating workers should wear protective goggles and masks to prevent physical block splashed into the eyes, reduce dust inhalation; wear gloves and coveralls to prevent dust from entering the skin and allergies; choose a well-ventilated, well-lit place for cutting; cutting ago Check all power tools is intact and safe.
Washing room FRP grating installation
FRP grating based engineering design to install and use a variety of installation methods, currently there are four mounting method: staircase installation, ditch installation, floor installation and support beams installed.
A. Stairs installation:
. a prominent staircase leading edge, using easy visual color (usually black);
. b each corner support client uses two M-type or L-type fasteners;
B. Ditches installation:
Four installation method the user can choose according to occasions.
Suggestions:. A grill each side supporting at least *0mm of supporting the center **0mm ~ ***0mm should be used for each clip. Each grid using at least four retaining clips, the bottom grid and the grid connection should support.
b. The company has applied to the height of *5mm ~ *8mm grille M, L, C fixed stainless steel clamps, fasteners.
c. connect the clips can be fixed with a support structure connecting bolts and nuts or rivet holes connected to the heart. Generally based on the use of the environment to select the support frame. Optional glass steel frame, stainless steel frame and general framework, ordinary steel outer frame should be embalmed.