Descripción del producto

It has rapid-fire and stepping-fire two functions and can operate not only on the machine but  in remote control!

The rapid-fire time from 0.1 seconds to 9.9seconds,you can adjust it in your mind! There is battery inside ,so it can work outside and connect with other machine,in the working time ,it can work from the first machine to the last,the time of the machines can adjust alone! Put the plug connector to the current electricity and charge for two hours.

1.     rapid-fire

turn  the switch to on ,the light of the power source is bright,the voltage to the work voltage,the power source is normal and can use! Press the reposition show *0,press the work ,when you press it ,the next product can be fired

2 stepping

Press the reposition show *0,press the used to adjust time,when you press it one time,the time can adjust in front time ,when you press it more time,the time can be adjust next

3.fire and test

Turn on the  switch to "test"position,then connect the products,if the products connect well ,the relative light will be bright. turn on the switch to "fire"position and press the "Start",it will be fired.

4.the use of the remote control

A: adjust time   C: Start  D: reposition

Regulation:

1. Please don’t make it to be short circuit for that would damage machine. 
2. If connecting products in series, for the resistivity of ignition dissimilarity from  different factory , please use the products which made by the same factory;
3. They would affect each group’s ignite quantity directly for the differences is existed in different products ignite, the thickness of lines, and the distance of circuitry;
4. After connect the products, when the switch is on the”test” position and without press the “fire” , but the “test” is bright, it indicates this group is damaged, please not use this group, but no effections for other groups.
5. Please turn off the power switch when the circuit connecting but no need use it , and notice to do not shake machine violently.
6. Please don’t press “fire” after
7. Please put the power switch on “off” position, put the conversion switch on “test” position when no need to use it.
8. Please don’t place the product in the damp , sour ,alkali and pollution environment.
9. when you do not use the machine ,please charg the battery two hours every 7days