Descripción del producto

Flux-Cored Wire AWS E*1T**1 / E*1T-GS / E*1T*1
AWS E*1T**1
Key Facts:
   Versatile welding capability on a variety of base materials
   High operator appeal and good bead appearance
   Easy slag removal
   Fast freezing characteristics accommodate poor fit-up

Description
AWS E*1T**1 is precision layer wound, flux cored mild steel MIG wire for use with CO2 gas. Recommended for welding of mild & carbon steels. Most suitable in production or general fabrication where highest deposition rates & low spatter is required.

Classification
AWS:AWS E*1T**1 

Welding Positions
Flat, horizontal,vertical-up, vertical-down and overhead. 

Markings & Identification
Endtip colour:Blue 
Available
Printing:AWS E*1T**1 

Application:
   Sheet or thin gauge metal
   Galvanized sheet metal
   Robotic/hard automation
   General fabrication
   5/*6″ maximum plate thickness for 0.**5″ and smaller diameters
   1/2″ maximum plate thickness for 0.**8 3/*2″ diameters

Key Facts:
   No Shielding Gas Needed
   Single Pass Welding of Thin Gauge Galvanized Steel
   Excellent for Outdoor Use
   Smooth Arc Minimal Spatter
   DC- Straight Polarity
   Works Well In Wind 

Description
Gasless Wire E*1T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as *0 gauge, without burn-through. Gasless Wire E*1T-GS is commonly used on small portable **0 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy. 

AWS Specification
AWS A5.*0: E*1T-GS 

Industry Specification
AWS A5.*0: E*1T-GS 

Welding Positions
All positions except vertical down 

Markings & Identification
Printing:AWS E*1T-GS

Gasless Wire E*1T-GS is most popular for the home workshop welder because it works so well on **0 volt machines and can be used on such thin gauge steel. Gasless Wire E*1T-GS is used quite extensively in automobile bodyshops for door or body repairs and it is also used for sheet metal duct work on lap and butt joints.