Descripción del producto
PHOTOVOLTAIC FLOATING PLATFORM
PRODUCTS SPECIFICATION
Sunglory
May ***6
1.OVERVIEW
Sunglory has began to study on the PV floating platform from the
beginning of ***1, has already achieved related 9 invention
patents, *2 utility model patents. Products have been identified
through the Chinese Center for disease control and prevention,
China classification society quality certification center about
storm flow conditions test, and wind tunnel test of TV Rhineland
and Guangdong Provincial Academy of Building Research. Sunglory has
already had the design ability of floating PV power station
solutions.
This product is mainly used for the floating PV power station. For
PV modules, equipment and personnel to provide buoyancy, but also
can stop the water floating objects, so as to avoid the damage to
the PV module.
2.PRODUCT INTRODUCTION
2.1ADVANTAGES OF FLOATING PV POWER STATION
Floating PV power station is one platform with the photovoltaic
modules floating on the water to generate electricity. Floating PV
power station doesn't occupy land resources. Meanwhile, water,
which has a cooling effect for photovoltaic modules, can prevent
surface temperature increased and achieve more power output.
2.2MATERIALS & PROCESSING INTRODUCTION
The products are made of high density polyethylene (HDPE)
production of the new import environmental protection material,
which also add anti-aging, such as UV, guarantee products with
enough toughness, hardness, to withstand natural environment
changes and low temperature.
Whole product is produced by blow molding process, which is
seamless, no water seepage, and durable.
2.3PRODUCT COMPATIBILITY
Product can be compatible with all crystalline silicon modules and
double glass modules in the market.
Crystalline silicon modules width: **1 + 2 mm, module length: ***0
~ ***0 mm.
Hanergy thin-film double glass modules: Solibro CIGS thin film
double glass modules (L * W: ***9 * **9.5 mm)
2.4CHARACTERISTICS OF FLOATING PV POWER STATION
The Floating PV power station is no limitation for the installed
capacity and off/on grid operation mode. The floating power
station layout is flexible, can be located close to shore or center
of water area.
2.5ANCHOR INSTALLATION
Floating platform is to be fixed by anchor. Usually the anchor
point is at the bottom of the waters, but also has a shore
anchorage. Anchoring solution should consider the actual status of
the project.
Water level change less than 1 m: the heavy anchor or sunken stone
fixed.
Water level change < 3 m: add elastic spring between the cables
and anchor/heavy stone.
Water depth change > 3 meters: use the winch type cable
connected to heavy anchor/ heavy stone.
The targeted anchorage design will be carried out according actual
project information.
2.6PRODUCT INTRODUCTION
This product mainly includes: main floating base, long rack, short
rack, maintenance aisles, peripheral protection floating body,
connecting pin bolts and gaskets, etc.
Main floating body (1floating base + 2 long rack+ 2 short rack) is
mainly used for mounting photovoltaic modules and equipments. Using
the connection holes on the racks to fix photovoltaic modules and
equipment on the floating body, meanwhile, to provide buoyancy by
the floating base.
Maintenance aisles are mainly used as aisles, to provide
convenience for maintenance personnel. At the same time the
maintenance aisles and the main floating body to be connected
together to make the stability of the entire product increased.
Peripheral protection floating body is installed outside the PV
array, the main purpose is to effectively connect the maintenance
aisles between array, and to ensure that the entire array of
photovoltaic power station to be a whole and its stability.
Connecting pin bolt is mainly used to tighten the floating body,
maintenance aisle and the protection floating body. Meanwhile it
has the self-locking functions to prevent loose.
2.7PRODUCT PERFORMANCE PARAMETERS
PERFORMANCE PARAMETERS LIST OF MAIN FLOATING BODY UNIT
|
Materials |
High density polyethylene(HDPE), in
accordance with the Hunt water absorption test (CN), including anti
aging, anti ultraviolet, etc. |
Wall thickness(mm) |
4~5 |
Weight(kg) |
*1~*2 |
Process |
Blow molding |
Tilt angle |
Support for photovoltaic modules, tilt
Angle is *5 degree |
Product Advantage:
The diagonal connecting lug of the main floating body can bear the
pulling force far super domestic and foreign similar products
(***0daN), ensure no deformation and fracture; the inclination
angle is more suitable for the light condition of mainland China
and Hong Kong, Macao and Taiwan for more capacity. |
PERFORMANCE PARAMETERS LIST OF MAINTENANCE AISLE
|
Materials |
High density polyethylene
(HDPE), in accordance with the Hunt water absorption test (CN),
including anti aging, anti ultraviolet, etc. |
Wall thickness(mm) |
4~5 |
Weight(kg) |
*1~*2 |
Process |
Blow molding |
Function |
Ensure that modules no shadows
and the aisle with anti slip texture. |
Advantage:
The diagonal connecting lug of the main floating body can bear the
pulling force far super domestic and foreign similar products
(***0daN), ensure no deformation and fracture; There are two kinds
of Aisle, is compatible with CIGS PV modules and crystal silicon PV
modules of different length. |
PERFORMANCE PARAMETERS LIST OF CONNECTION PIN
|
Materials |
Reinforced nylon (PA*6) |
Pin weight(g) |
**4 |
Process |
Injection molding |
Function
|
Connecting and fastening the
main floating body and the aisle, with the position-limit and
self-locked functions |
2.8PRODUCT DIMENSION
NO. |
DESCRIPTION |
DIMENSION(mm) |
1 |
Main Floating base |
***1×***1×**0 |
2 |
Maintenance aisle |
***0***0***0 |
4 |
Long rack |
**7***9***0 |
5 |
Short rack |
**2***5***0 |
6 |
Blow molding screw group
(main floating base) |
Ф*0**0 |
7 |
Plastic nut |
Ф*0**5 |
8 |
No.2 Protection aisle buoy
(protection) |
***0***0***0 |
9 |
Blow molding screw group
(protection) |
Ф*0**0 |
*0 |
Photovoltaic (PV) bolt |
Ф*2***1 |
*1 |
gasket |
Ф*0**6 |
2.9PRODUCT ACCEPTANCE CRITERIA
NO. |
CONTENTS |
ACCEPTANCE
CRITERIA |
REMARK |
|
|
1 |
Product Appearance |
Product should be no obvious
cracks
Product lugs should be smooth and without bending down
Connection hole should be no obvious burr |
|
|
2 |
Product sealing mouth |
Sealing plug should provide
with seal ring
Sealing plug should apply sealant when screwed in
Sealing plug should be screwed tight, not leak, water leakage |
|
|
3 |
Racks |
The mounting holes of
supporting racks should be through |
|
|
4 |
Product Size |
Main floating
body(L*W*H):***0****0***0 |
The installation hole pitch
(tolerance±3mm) |
|
5 |
Aisle1(L*W*H):***0***0***0 |
The installation hole pitch
(tolerance±3mm) |
|
6 |
Aisle2(L*W*H):***0***0***0 |
The installation hole pitch
(tolerance±3mm) |
|
7 |
Protection-Aisle(L*W*H):***0***0***0 |
The installation hole pitch
(tolerance±3mm) |
|
8 |
Color |
Grey |
|
|
3.STANDARDS AND SPECIFICATIONS
Conforms to the ***1.******8 GB water absorption test standard
Safety evaluation criteria for *********8 GBT drinking water
equipment and protective materials for drinking water
3.1PRODUCT APPLICABLE ENVIRONMENT
Floating PV power station potential areas:
Reservoir
Lakes
Pond
Industrial waste water pool
Subsidence water area of coal mineral
Environment conditions:
Ideal water velocity: no more than 1 m/s
The applicable temperature: - *0 ºC to *0 ºC
Snow load: to *0 DaN /m2
Wind load: not less than *0 m/s.
3.2PRODUCT PACKAGING &TRANSPORTATION
This product need no special packaging (attachments packaged with
woven bags, large products without packing).
Transport by land, water transportation, etc.
País: |
China |
N º de Modelo: |
-
|
Precio FOB: |
( Negotiable ) (Negociable)
Obtener el precio más reciente
|
Lugar de origen: |
- |
Precio de pedido mínimo: |
- |
Cantidad de pedido mínimo: |
50 Kilowatt |
Detalle de embalaje: |
- |
El tiempo de entrega: |
- |
Capacidad de suministro: |
- |
Tipo de pago: |
T/T, L/C |
Grupo de productos : |
- |