Descripción del producto

The SWG***0A Flap Barrier guarantees fast, smooth and efficient access control in both entry and exit directions.
**4 stainless steel framework inside, ABS material top cover with polishing surface, ABS material edge with polishing surface, **4 stainless steel access door with Brushed surface, no soldering at surface and edge.
When power off, the door wings open into the casings to the request of fire protection.
Particularly elaborate design making this security barrier appropriate for almost any building.
With its mechanical design and its embedded electronics, the equipment guarantees high levels of safety.
The system is provided with a standard eclectics interface and is easily integrated with access control system.
It can be used for intelligent control and management of the passage after equipped with different access control system.

Function description:
The door wings open automatically, permit authorized passage and block unauthorized entry and raise alarms draw the attention of security.
With function of self-examine and alarms, it is convenient for users to maintain and use.
Two directions controlled/one direction controlled, with LED direction indicator.
Reset automatically, go signal will be cancelled if passage through is not completed within pre-set time, the standard default is *0 seconds.
Unit can be adjusted permanent open or close when power off to meet different needs.
Unit can be controlled and administered by remote control
Normally closed operation mode or normally open operation mode can be adjusted via the built-in small keyboard or software.
Anti-pinch function, tailing-proof and intruder alarm function

Working principle:
The user can be authorized via access control system or push , Confirmation of authorization is provided through a LED display in the top cover of the unit and the door wings open automatically, immediately the user passes the passage, the door wings quickly re-close to prevent tailing-proof, an anti-pinch function will protected the user to prevent pinch.

Technology specifications:
Framework: **4 Grade Stainless Steel
Materials of top cover: ABS
Dimensions: ***0***0***0mm
Material of wing gates: Organic glass
Width of wing gates: **0mm (default)
Width of the lane:**0mm (Standard)
Net weight: single wing unit: **0kg; double wings unit: **0kg
Interface: RS**5
Power supply: **0~**0V AC / **0~**0VAC *0/*0Hz
Main board voltage: *4V
Transit speed: ****0persons per minute
Working Environment: Indoor/Outdoor (with a tent over)
Temperature: *0 below degree to *0 degree
Humidity: ≤*0%

Options:
Access controller and proximity reader
Material of door wings is optional
**6 grade stainless steel
Remote control