Precio FOB
Obtener el precio más reciente|
1 Minimum Order
País:
China
N º de Modelo:
T20 T30 T35
Precio FOB:
Lugar de origen:
-
Precio de pedido mínimo:
-
Cantidad de pedido mínimo:
1
Detalle de embalaje:
-
El tiempo de entrega:
-
Capacidad de suministro:
100
Tipo de pago:
-
Grupo de productos :
-
Persona de contacto Mr. Zhihua
beisha lishui nanhai, Foshan, Guangdong
TDC unit is one of the two universal flange making systems in the world. It can save time and material drastically with its wel-seal, strong and durable joint structure. So it is especially suitable for producing duct with large section area. Today many famous buildings in the world utilize this kind of structure in the ventilation system such as the American Kennedy Space Center, Guangzhou CITIC Plaza etc. The unit consists of a feeding frame, main forming machine and a shearing unit, which includes grinder and hydraulic shearing unit. The hydraulic shearing unit makes fixed cutting available with very little burr, and may be operated automatically with a maximum work speed of 6 m/min. It is divided into four types: T**0, T**0, T**5, and T**0 with their corresponding duct corner T**0DC, T**0DC, T**5DC and T**0DC. . TDC made by GD may match and produce all the ducts in the DW**4 standard, and has passed the HVAC PW/TMI(***7) pressure test, which is a speciality test for the intensity and sealed condition of a duct. TDC FabricationAnd Installation 1. GD TDC flange only requires ordinary fretsaw for cutting. The flange strip should be cut to *0mm shorter than the length of duct groove. The flange also should be cut as the direction shown in the picture to prevent metal cutting damage on flange structure. The notching should be slippery after cutting. 2. Insert four corner joints into the ends of the flange and ensure the corner joints are fully inserted into the flange. Then the whole flange frame can be fixed. 3. Insert the flange frame into the duct from one side of the frame, then along the whole flange frame. 4. Fix the flange into the duct by various methods, spot welding or riveting. But distance for fixing must be taken as standard DW**4 Table5. The maximum distance from angle to the fixing point should not exceed *0mm.
País: | China |
N º de Modelo: | T20 T30 T35 |
Precio FOB: | Obtener el precio más reciente |
Lugar de origen: | - |
Precio de pedido mínimo: | - |
Cantidad de pedido mínimo: | 1 |
Detalle de embalaje: | - |
El tiempo de entrega: | - |
Capacidad de suministro: | 100 |
Tipo de pago: | - |
Grupo de productos : | - |