Fiber Optic Media Converter-10/100/1000 mbps

Descripción del producto

Media Converter *0/**0M

*0/**0M Media Converter
BC**0/**0M adaptive Ethernet media converter can interconvert the electric signal of **0Base-TX twisted pair cable and optical signal of **0Base-TX. It extends the network transmission range from **0m to **0Km (single mode optical fiber). Its typical application is Ethernet long range interconnection, such as the interconnection between the equipment room of community with MAN. No configuration of the switch is needed during connection due to the adaptive function. The newly added lightning protection function guarantees the safety of the equipment. There are outside power supply, built-in power supply optional, AC**0V, DC *8V optional.

Product feature:
Adaptive
BC**0/**0M provides the adaptive function of *0/**0M rate and full/half duplex, significantly protects the existing network investment during network upgrade.
Mass buffer
Unique buffer technology ensures the excellence of your network in data transmission and multimedia application; The buffer is 2M.

Performance:
Main features:
In conformity with the following
IEEE**2.3 *0Base-T standard
IEEE**2.3U **0Base-TX/FX standard
IEEE**2.3X standard

Interface transmission rate:
Optical interface: **0Mbps
Electrical interface: *0/**0Mbps

Automatic identification with cross line and through line:
BC**0/**0M can use either cross line or through line for connection with the devices such as switch or server.
TX LINK/ACT lamp "On" indicates the correct interconnected link.

Duplex supportive:
BC**0/**0M supports full/half duplex adaptive, and *0/**0M adaptive.

Network cable:
*0/**0Base-TX UTP 5
**0Base-FX: Single mode fiber 8.3/**5, 8.7/**5, 9/**5 or *0/**5μm
Multi mode fiber *0/**5, *2.5/**5 or **0/**0μm

Transmission range
*0/**0Base-TX: **0 m
**0Base-FX: 2km (multimode)
*5/*0/*0/**0 km (single mode)

Optical interface feature:
Wavelength: ***0nm(*5km, *0km, 2km)
***0nm(**0km)
***0nm(multi-mode 2km)

LED display:
PWR: Power indicator lamp
FX LINK/ACT: Optical link connecting/ active status indicator lamp
TX LINK/ACT: Electrical link connecting/ active status indicator lamp
FX**0: Optical interface rate indicator lamp
TX**0: Electrical interface rate indicator lamp
FDX: Full/half duplex indicator lamp

Interface configuration:
One RJ*5 *0/**0Base-TX interface
One SC/ST single/multi mode duplex connector

Power requirement:
Outside power supply: 5VDC 1A
Power consumption: <5W
Built-in power supply: **0VAC, **8VDC
Power consumption: <5W

Environmental requirement:
Operating temperature range: 0~*0
Storage temperature range: **0~*5
Relative humidity: 5%~*0%

Dimensions:
Outside power supply: *6mm**1mm**4mm
Built-in power supply: *0mm***0mm***0mm