Precio FOB
Obtener el precio más reciente( Negotiable )
|5000 Square Meter Minimum Order
País:
China
N º de Modelo:
1.2-2.0mm
Precio FOB:
( Negotiable ) Obtener el precio más reciente
Lugar de origen:
China
Precio de pedido mínimo:
-
Cantidad de pedido mínimo:
5000 Square Meter
Detalle de embalaje:
woven bags
El tiempo de entrega:
within 2 weeks
Capacidad de suministro:
5000 Square Meter per Day
Tipo de pago:
T/T
Grupo de productos :
Persona de contacto Mr. James
Room 405, Huapeng Office Building, No. 21 Middle Zhengyang Road, Chengyang district, Qingdao, China., Qingdao, Shandong
Modified EPDM waterproofing membranes
Products Description
EPDM waterproofing membrane is the modified materials. They are based upon EPDM rubber with modifier, softener and accelerant assistants’ added modifier, to provide flexibility and stability. Through the precise ingredients, mixing, extrusion, rolling, curing processes to make of modified EPDM Waterproofing material with high strength and high flexibility.
Products Specification
Thickness: 1.2mm, 1.5mm & 2.0mm Width: 2m Length: *0m
Physical Properties(GB****3.*****0)Properties( GB****3.*****0)
|
Item |
value |
||
|
JL1 |
JF1 |
||
|
Tensile Strength (Mpa) |
normal temperature |
7.5 |
4.0 |
|
*0°C ≥ |
2.3 |
0.8 |
|
|
Elongation at break (%) |
normal temperature ≥ |
**0 |
**0 |
|
**0°C ≥ |
**0 |
**0 |
|
|
Tear Resistance (N) |
≥ |
*5 |
*8 |
|
Water impermeability |
*0mm |
0.3Mpa |
0.3Mpa |
|
Cold bending |
(°C) ≤ |
**0 |
**0 |
|
Heating Shrinking rate |
extend < |
2 |
2 |
|
shrink < |
4 |
4 |
|
Installation
There are two installation ways. One is full sticking, the other is hot welding.
Application Range
EPDM waterproof membranes form an effective barrier to liquid water or water vapor in the roof construction for industrial and civil engineering, underground engineering such as subway & tunnel, water conservancy tunnel, such as water pools & ditch, shelter, grain depot, land filling, subways.
APPLICATION METHOD
1) Make sure the roof deck smooth,clean and dry(Moisture<9%),then apply the surface of roof deck homogeneously with a kind bitumen paint till dry to start application.
2) There are two methods in application:
One way is by heating and melting method**-Heat the polyethylene film of the membrane and roof deck surface by heating and melting method to be nearly melted(not flowing),then install the membrane fully bonded to the roof deck with overlaps of ***0cm.
The other way is by cold adhesive method**-Pour the cold adhesive homogeneously on the roof deck then roll the membrane to install it to be fully sticked to roof deck.
By heating and melting method and by cold adhesive can be used in alternation in application as requested.
3) After application,a full serious inspection is required to make sure no air bubble,no fold,no falling away etc to guarantee the waterproof life.
| País: | China |
| N º de Modelo: | 1.2-2.0mm |
| Precio FOB: | ( Negotiable ) Obtener el precio más reciente |
| Lugar de origen: | China |
| Precio de pedido mínimo: | - |
| Cantidad de pedido mínimo: | 5000 Square Meter |
| Detalle de embalaje: | woven bags |
| El tiempo de entrega: | within 2 weeks |
| Capacidad de suministro: | 5000 Square Meter per Day |
| Tipo de pago: | T/T |
| Grupo de productos : | EPDM waterproofing membrane |
