Environmentally friendly non-toxic food grade mold silicone rubber

Descripción del producto

 Environmental friendly non-toxic food grade mold silicone

rubber forCake, candy and chocolate mold

Description of Environmentally friendly non-toxic food grade mold silicone rubberfor Cake Mold
E***5 addition molding silicone is generally named two-components silicone

rubber, Part A and part B. It features an exceptional fluidity and good operability. The

mixing ratio is 1:1,mainly be suitable for making molds application.

Applications of  RTV liquid Silicone for Cake Mold,additon silicone rubber(platinum)

E***5 addition molding silicone could be mainly used for making concrete

Stones mold , jewelry mold , statue mold, artificial craft mold, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolatemold , cake mold , candy and any other FDA food product mold making,prototyping etc.

Advantage of  RTV liquid Silicone for Cake Mold,additon silicone rubber(platinum)

*low shrinkage (less than 0.1% )

*high tensile and tear strength with high copy times

*easy for operation (mixing ratio at 1:1)

*good fluidity easy for pouring operation ( in round ****0 cps )

Technique Data Sheet of E***5 addition cure silicone

(Note: the hardness , color, curing time and operation time is adjustable)

Operation instruction of HY-E Series molding silicone:

1.Pls clear the model and tool totally before operation to prevent cure inhibition.

2.Weigh the two part correctly by electronic weight in two separate container .

3. Mixing the two part in 1:1 and stir part A and part B evenly in **3 minutes .

4.And get the mixture for vacuum-pumping for de-air the bubble in around **3

minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly

down the side of the mold frame so that less bubbles caused)

5. Enclose the product (the original model) with four plastic plates or wooden plates.

6. Clean your products and brush a layer of release agent(detergent or soap water) on

your product.

7. Pour the vacuumed mixture into the model frame from the side of the mold frame .

Notice:As our E-series silicone is platinum cure silicone , which is very easy to cause

cure inhibition , so pls do remember thoroughly clean the model and tool before

operation . Besides , pls avoid the liquid E-series silicone contact or mix with the

following material , otherwise the silicone wont be cured:

1. Liquid condensation silicone ( condensation silicone not completely cured or organic

tin compounds )

2 .Sulphur, sulfide and sulfur rubber materials.

3. Amine compounds as well as contains the amine materials.

4 .Pewter solder flux.

SHELF LIFE:***0 months when stored under *4°Cin original unopened packages.

PACKAGE:Packed in *0kg/pail**0kg/pail, **0kg/pail***0kg/pail.

For more information, pls feel free to contact Ms Hebbe

office no. :****************6

Mob: *****1*********4

Email: hyse(at)szrl(dot)net