Descripción del producto

Scope of application
Application standard of engine coolant aluminum pump cavitation corrosion tester: SH/T***7 The test method of the instrument is to pump the sample with the standard aluminum vehicle water pump, make the pump run for **0h under certain conditions, then check the water pump, determine the degree of cavitation corrosion, and rate it according to the hierarchical system table. The instrument is used to measure the engine coolant and the concentrated liquid of the engine coolant.

Features
     1. Buick aluminum pump and engine hood are used, and it is easy to remove and replace the aluminum pump.
    2. The explosion-proof motor is used, the inverter of two pump speeds is used to regulate the speed, the digital meter is used to display the measured speed, accurate and intuitive, and the circuit control is equipped with the over-temperature protection device.
    3. The system uses the stainless steel pipe connection, the desktop is made of stainless steel, and the fasteners are the stainless steel screws, which is easy to remove and is never rusty.
    4.The multi-function digital timer is used, and the timing can be continued even after suspension.
    5. The electric heating tube is used for heating, and the tank is equipped with a safety valve, so as to ensure safe and reliable operation of the instrument.
    6. The instrument is equipped with the imported digital temperature controller, and PID tracking temperature control has high accuracy.

Technical parameters
1. Aluminum pump speed: ***5r/min, ***0±**0r/min.
2. Pressure indication: **3±3Kpa.
3. Control temperature: *3~*8℃, **3±3℃.
4. Heating power: 2kw.
5. Machine power: 4.2kw.
6. Power supply: AC**0V±*0% *0HZ.
7. Overall dimension: ***0×**0×***0 = L×W×H (mm).
8. Machine weight: **0Kg.