Eco-friendly EPDM Waterpfroof membrane

Descripción del producto

Introduction       
EPDM waterproof membrane is of high elasticity among high polymer waterproof materials and becomes a world-popular waterproofing material. Hongyuan EPDM waterproof membrane is  made from ternary ethylene-propylene rubber, which is designed for waterproofing of exposed and non-exposed applications. Hongyuan EPDM waterproof membrane production adopts the world-advanced equipment of cold feeding extrusion and continuous vulcanization technology.                                                                                                                   
       
Features       
â–  Excellent weatherability, durability and size stability       
â–  Good adaptability to high and low temperature, UV resistant and anti-corrosion       
â–  High tensile strength and good elongation, accommodating substrate movement       
â–  Easy installation, environment friengly       
â–  Good rooting penetration resistance       
â–  Service life up to *0 years       
       
Applications       
â–  Subways, tunnels, roofs, basement        
â–  Industrial and civil building waterproofing, like water reservior, bridge, dam, etc.       
â–  Geosynthetic liner for swimming pool, channels, irrigation system       
â–  Especially suitale for projects with high requirements in durability, anti-corrosion and deformation        
       
Specificaitons       
       
Thickness (mm) Roll Size (m) Roll Weight (kg)  Colors  *0ft Container 
1.0 mm 2.*5m x *0m *8.*0   Black/ White  **0 rolls/ ****0 sqm 
1.2 mm 2.*5m x *0m *6.*6   Black/ White  **0 rolls/ ****0 sqm 
1.5 mm 2.*5m x *0m *6.*6   Black/ White  **0 rolls/ ****0 sqm 
2.0 mm 2.*5m x *0m *6.*0   Black/ White  **0 rolls/ ****0 sqm 
ASTM Standard D****5       
Property  Test Method  Units  Minimum  ASTM 
      Sl Eng
Specific Gravity  ASTM D***2  gm/cc  1.1 1.1
Unit Weight  ASTM D***1  kg/m2  1.3 0.*7
Thickness Type 1  ASTM D***2  mm(in)  1.*2**5/**0% 0.*4**5/**0%
Tensile Strength. Die C  ASTM D***2  Mpa(psi)  9 ***5
Ultimate Elongation,Die C  ASTM D***2  %  **0 **0
Tear Resistance,Die C  ASTM D***4  Kn/m(lbf/in)  *6.*7 **0
Puncture Resistance  ASTM D****3  N(lbs)  **3 *0
Shore A Durometer  ASTM D****0  -  ****0 ****0
Ozone Resistance  ASTM D****9  -  No Cracks No Cracks
Multiaxial Elongation  ASTM D****7  %  **0 **0
Heat Aging *8 days at **0 degrees  ASTM D***3  -  - -
Tensile Strength, Die C  ASTM D***2  MPa(psi)  8.3 ***5
Ultimate elongation, Die C  ASTM D***2  %  **0 **0
Tear Resistance, Die C  ASTM***4  Kn/m(lbf/in)  *1.9 **5
Accelerated Aging Xenon Arc  ASTM G***5/G***1  -  Pass Pass
Brittleness Point  ASTM D****7  -  **5℃ **9 ºF
Water Absorption  ASTM D***1  %  *8,*2 *8,*2
Water Vapor Permeability, max  ASTM E**6  Per mils  2 2
Linear Dimensional Change,max  ASTM-D****4  %  +/*1.0 +/*1.0
Chronic Toxicity Screening  EPA/**0/***9/**1ASTM E***9  Method ***0.0  Pass Pass
       
EPDM Heat Aging Test Report       
EPDM Thickness: 1.2mm  Testing Method: ASTM Standard   Testing Date: *********3  
       
Item Standard Tensile strength Breaking elongation Average  Keep rate 
    Tensile strength Breaking elongation Tensile strength Breaking elongation
Normal test Vertical Tensile strength≥9.0Mpa Elongation≥**0% *0.7 **6 *0.9 **5 ****- ****-
  *0.6 **8    
  *1.4 **2    
 Horizontal Tensile strength≥9.0Mpa Elongation  ≥**0% *0.6 **4 *0.6 **4 ****- *****-
  *0.8 **4    
  *0.6 **6    
Hot air aging **6℃ *8 days Vertical  *2 **0 *2.2 **5 **1.*0% **3.*0%
  *2.4 **8    
  *2.4 **8    
 Horizontal *3.1 **0 *2 **2 **3.*0% *6.*0%
  *2.9 **8    
  *0.2 **8    
 Tear resistance *1.1 *0.7 *0.9     ******- 
Low temperature **5℃ Pass  *********-   
       
Installations       
Full adhesive system       
Full adhesive system conforms to the idea of traditional installation, It is recommended for exposed waterproof construction, such as dam, bridge, swimming pool, etc.       
       
Steps: 1. adhere the EPDM membrane directly to the smooth and clean substrate like concrete deck, insulation board, etc.        
2. Adjust membrane to make sure the overlaps is no less than *0cm and wiped clean.        
3. Then, apply special adhesive evenly to both the substrate and the membrane laps or seam tape.        
4. After minutes, press it securely and finish with sealant.       
       
Border adhesive system       
Border adhesive system is specially designed for underground and roofs which have wide, flat roof decks and bear heavy loads like accessible roof, planting roof, inversion roof. It is also economical and easy to install.       
       
Steps: 1. Spreading the waterproof membrane over the substrate.        
2. All membrane laps should at least be *0cm and should be wiped clean.        
3. Splice all membrane laps and edges with Hongyuan adhesive or seam tape.        
4. Finish with sealant.       
       
Mechanical fastened system       
Mechanical fastened system combines sound and durable quality with simple and easy installation. It is environment friendly since it does not use much organic solvent. It is cost-efficient and suitable for large projects.       
       
Steps: 1. Loosely lay the EPDM membrane on top of concrete roof deck or insulation board.         
2. Then, fix it with Hongyuan fastener.         
3. All membrane laps should be at least *0 cm and should be wiped clean.         
4. Splice all membrane laps with Hongyuan adhesive or seam tape.         
5. Finish with sealant       
       
Attentions       
â–  Storage: EPDM material should be stored in well-ventilated place and avoid being exposed to the sun or rain. It  only can be put horizontally in five-level, avoiding acid, alkali, oil and organic solvents.       
â–  Substrate treatment: substrate should be firm, smooth, clean and dryness (moisture content ≤9%), no dust pollution.       
â–  Do not install in raining, snowy and category five or above wind days.