Descripción del producto

 Direct reactive power compensation series reactors CKSG*3.0 / 0.**6% rate of 6% reactance

Model: CKSG*3.0 / 0.**6% 

System rated voltage: 0.*5 (KV) 

Current Rating: *2.2 (A) 

Purpose: filter reactor 

Product Certification: iso***1 

First, use 

This series of dry-type iron core series reactor for low voltage reactive power compensation cabinet, in series with the capacitor, when a large number of low-voltage grid rectifier, harmonic source converter devices, its higher harmonics generated would seriously endanger the main security change and other electrical equipment operation. After the reactor in series with the capacitor, can effectively absorb harmonic, improve voltage waveform system, improve system power factor, and can effectively suppress inrush current and over-voltage operation, effective protection of the capacitor. 

Second, the structural characteristics 

1 The reactor is divided into three-phase and single-phase two kinds, both core dry. 

2 cores with high-quality low-loss imported cold-rolled silicon steel sheet orientation, core columns by the number of air into small pieces evenly gap with epoxy glass cloth laminated board for the interval to ensure that chokes the air gap does not occur during operation changes. 

3 coil using H or C grade enamelled flat-wound, tightly packed and uniform appearance without insulation layer, with excellent aesthetic and better heat dissipation. 

4 reactor coil and core assembly into one after pre-drying → ​​→ thermal vacuum impregnation bake curing this process, using the H-class varnish, so that the reactor coil and core firmly together, not only greatly reduced noise runtime, and has a very high heat levels to ensure the reactor can also safely without noise at high temperature operation. 

5 column reactor core using non-magnetic material part fasteners, to ensure that the reactor has a high quality factor and low temperature to ensure good filtering effect. 

6 exposed parts are taking anti-corrosion treatment, leads to the use of tin-plated brass terminals terminals. 

Third, the use of environmental conditions 

1 no more than ***0 meters above sea level. 

2 Operating temperature **5 ℃ ~ + *5 ℃, relative humidity less than *0%. 

No harmful gases 3 around, no flammable items. 

4. surroundings should have good ventilation conditions, such as installed in the cabinet should be installed ventilation equipment. 

Fourth, the performance parameters 

1 can be used for **0V, **0V systems. 

Reactance rate of 2 types: 1%, 6%, *2% 

3 Rated insulation level 3kV / min. 

4. various parts of the reactor temperature limits: the core is not more than *5K, loop electrosurgical temperature does not exceed *5K.

Have Core: Core Reactor 

Insulation Structure: dry-type reactor 

Specifications Quote: CKSG*3.0 / 0.**6%