Direct air humidifying full cone atomizing nozzles

Descripción del producto

Product name:    Direct air humidifying full cone atomizing nozzles

Criteria for selecting Industrial atomizing nozzles:

1. Spray pattern 

Pneumatic flat fan atomizing nozzles should be chosen for humidifying and cooling of goods, for web dampening and for a number of painting tasks; in short, wherever a braod linear impact is required.

Pneumatic full cone atomizing nozzles, however, should be used, when a compact, circular impact or a major reach is required, e.g. for direct air humidifying, for gas cooling or for chemical process applications.

2. Mode of liquid supply

Whenever liquid can be supplied under pressure, it is recommended to use nozzles functioning by the liquid pressure principle. Use of pneumatic atomizing nozzles operating to the siphon or the gravity principle is recommended when liquid is to be sprayed in small quantities, e.g. for spraying of disinfectants.

3. Mixing of fluids

The supply of air or gas provides an additional breaking up of the liquid flow into finest drop particles. This supply and mixing can either take place inside or outside the nozzle. 
Inside mixing should be preferred, when water, or low viscosity liquids or liquids without solid matter are to be atomized.

Outside mixing is particularly suited for atomizing viscous liquids which are prone to impurities and therefore tend to cause clogging of the nozzle. Low liquid pressures are used with this type of nozzle due to its design.

1. Spray pattern 

Pneumatic flat fan atomizing nozzles should be chosen for humidifying and cooling of goods, for web dampening and for a number of painting tasks; in short, wherever a braod linear impact is required.

Pneumatic full cone atomizing nozzles, however, should be used, when a compact, circular impact or a major reach is required, e.g. for direct air humidifying, for gas cooling or for chemical process applications.

2. Mode of liquid supply

Whenever liquid can be supplied under pressure, it is recommended to use nozzles functioning by the liquid pressure principle. Use of pneumatic atomizing nozzles operating to the siphon or the gravity principle is recommended when liquid is to be sprayed in small quantities, e.g. for spraying of disinfectants.

3. Mixing of fluids

The supply of air or gas provides an additional breaking up of the liquid flow into finest drop particles. This supply and mixing can either take place inside or outside the nozzle. 
Inside mixing should be preferred, when water, or low viscosity liquids or liquids without solid matter are to be atomized.

Outside mixing is particularly suited for atomizing viscous liquids which are prone to impurities and therefore tend to cause clogging of the nozzle. Low liquid pressures are used with this type of nozzle due to its design.

Application of  Low pressure greenhouse misting nozzles               

1. 1. Textile workshop humidification
   2. Stock farm cooling sterilize
   3. Man-made fog sight
   4. Vegetable retain freshness
   5. Dust removing