Digital Dissolved Oxygen Analyzer pH Controller Online Orp pH Meter

Descripción del producto

1. Product introduction

Online PH meter JC-PH***0 is a new generation of intelligent water quality detector. It has the characteristics of Chinese menu operation, high stability, excellent repeatability, multi-function, etc. It can accurately measure the pH value, oxidation-reduction potential (ORP) and temperature value in the solution. Widely used in: environmental protection, sewage treatment, thermal power, aquaculture, food processing, printing, metallurgy, fermentation, chemical industry, tap water and other solutions on-line detection of PH value.

2. Product parameters

1. Measurement range: *0.*0~*4.*0PH, ****9~***9mV (ORP), 0~**0.0℃;

2. Resolution: 0.*1PH, 1mV, 0.1℃;

3. Accuracy: ±0.*2 PH, ±1mV, ±0.3℃;

4. Stability: ≤0.*1pH/*4h;

5. PH standard solution: 6.*6/4.*0/9.*8, 7.*0/4.*0/*0.*1;

6. Temperature compensation: 0~*9.9℃(PH);

7. pH calibration range: zero ±1.*5 pH; slope ±*0%;

8. Control interface: two sets of ON/OFF relay contacts, divided into high-point and low-point alarm control; 9. Signal isolation output: ***0mA isolation protection output;

*0. Relay: The hysteresis of the relay can be set arbitrarily, and the load of the relay is *0A **0VAC; *1. Working conditions: the ambient temperature is 0~*0℃, and the relative humidity is ≤*0%;

*2. Input impedance: ≥1×***2Ω;

*3. Output load: load <**0Ω (***0mA), load <**0Ω (***0mA); *4. Working voltage: **0VAC *0%, *0/*0Hz;

*5. Size: *6×*6×**5 mm;

*6. Hole size: *1×*1mm;

3. Product Features

1. Large-screen dot matrix liquid crystal display, Chinese menu operation, multi-parameter display at the same time.

2. Automatic temperature compensation function.

3. Communication function: It has RS***5 communication interface (partially compatible with MODBUS protocol, optional), which can convert RS***2. The PH value corresponding to the ***0mA current output can be set arbitrarily.

4. The company's host computer online acquisition software can be selected for data acquisition and processing.

5. Automatically identify standard solution and restore factory settings.