Descripción del producto

Diamond grinding wheel and drill, used for processing glass or ceramic products. According to the requirements of custom processing.

请亲们根据不同规格的玻璃订购对应的磨轮，建议客户每个规格的玻璃选用2个以上，毕竟磨轮是易耗产品，免得一下子用完又要买。

Please dear according to different specifications of glass grinding wheel corresponding to the order of each type, recommends that customers choose glass more than 2, after all, the grinding wheel is consumable products, or used up all of a sudden want to buy.

推荐搭配：

Recommended:

手提磨边机一台 + 多套对应规格的金刚石磨轮+抛光轮

Portable grinding machine with a set of corresponding + multi specifications of diamond grinding wheel and polishing wheel

如A客户平常需要磨8mm、*0mm和*2mm的玻璃，而且圆边和直边都有，那么推荐购买以下配套：

As usual, 8mm A customers need to wear *0mm and *2mm glass, and have rounded edges and straight edge, then recommend the purchase of the following facilities:

•æ‰‹æç£¨è¾¹æœºä¸€å°

- Portable edging machine

•8mm直边金刚石磨轮*8mm圆边金刚石磨轮各2个；

8mm - straight edge diamond grinding wheel *8mm round diamond grinding wheel 2;

•*0mm直边金刚石磨轮**0mm圆边金刚石磨轮各2个；

*0mm - straight edge diamond grinding wheel **0mm round diamond grinding wheel 2;

•*2mm直边金刚石磨轮**2mm圆边金刚石磨轮各2个；

*2mm - straight edge diamond grinding wheel **2mm round diamond grinding wheel 2;

•ä¸“用抛光轮6个

6 - special polishing wheel

（注：以上的金刚石磨轮客户可自行选择是采用电镀的或者烧结的都可以）

(Note: the above customers can choose the diamond grinding wheel adopts plating or sintering can)

烧结金刚石磨轮与电镀金刚石磨轮的区别：

The difference between sintered diamond grinding wheel with electroplated diamond grinding wheel:

1.生产工艺及设备不同，前者为电镀工艺，主要设备有直流电源、镀槽等，后者为烧结工艺，主要设备有压力机、烧结炉等；

1 different production technology and equipment, the electroplating process, main equipment, DC power supply plating bath, the sintering process, main equipment, press sintering furnace etc.;

2.产品结构和性能不同，电镀产品尺寸精度通常比烧结产品高；电镀产品工作部分金刚石浓度（即金刚石在胎体金属中的含量）比烧结产品高；电镀产品金刚石往往只有一层（电镀金刚石地质钻头除外，较细的金刚石也有多层的），而烧结产品金刚石往往有多层，因而烧结产品使用周期更长；电镀产品多使用品级较高的金刚石，而烧结产品多使用较低级的金刚石，为增加胎体对金刚石的把持力，烧结产品大都使用包衣金刚石（即表面镀有镍、铜或钛的金刚石）；

2 the product structure and performance of different products, electroplating products of high dimensional accuracy is usually better than sintering; electroplating products work (diamond concentration content in the metal matrix diamond) than sintered products high; electroplating products often only a layer of diamond (diamond drill head except geological thin diamond, also has multi), and diamond sintered products often have multilayer, and sintered products cycle longer; electroplating products using high grade diamond, while sintering products use lower grade diamond, in order to increase the adherence of matrix to diamond, diamond coating sintered products are used (i.e. coated with nickel, copper or titanium diamond);

3.产品适用性不同，电镀产品可以做成各种细小而又复杂形状，以适应不同的需要，而烧结产品不易做到这一点（当然不是绝对的）。

3 different products for electroplating products, can be made into various small and complex shape, to meet the different needs, and the sintering product is not easy to do this one (but not absolute).

所以，电镀金刚轮比烧结金刚轮价格低很多，耐磨性也没烧结金刚轮好。所以亲可根据自己的实际情况自行选择。