Precio FOB
Obtener el precio más reciente30000 / Set
|1 Set Minimum Order
País:
China
N º de Modelo:
LWL300*1200
Precio FOB:
30000 / Set Obtener el precio más reciente
Lugar de origen:
China
Precio de pedido mínimo:
30000 per Set
Cantidad de pedido mínimo:
1 Set
Detalle de embalaje:
wooden packing
El tiempo de entrega:
50days
Capacidad de suministro:
-
Tipo de pago:
-
Grupo de productos :
Persona de contacto Ms. chen
zhenxing, Liaoyang, liaoning
The solid drum is internally installed with a concentric discharge
screw As they rotate in the same rotation at a high speed, They
have a certain rotational speed difference, which is caused by the
driving system and the differential case Suspension enters the
internal of the charge screw through the speed pipe and then goes
into the drum after being accelerated Under the centrifugal force,
solid particles of big density settle on the in-wall of the drum,
and form a circular layer of cake, which is continuously pushed by
the discharge screw to the small end of the drum then out of it,
while the settled liquid is continuously discharge out of the drum
from the vortex finder of the big end of the drum, hence
solid-liquid separation of suspension.
Technical characteristics
1. High rotational speed, high separation factor and big
length-to-diameter ratio. For centrifuges with drum diameter below
**0mm, their separation rotational speed is usually above
***0r/min, their separation factor is above ***0 and their
length-to-diameter ratio can reach up to 5. Among them, the highest
rotational speed can reach ***0r/min, its separation factor is
above ***0.
Big single machine processing capacity: The decanter centrifuge
series with diameter of **0, **0, **5, **0, **0, **0, **0, **0,
**0, **0 and **0(mm) are all designed according to the newest fluid
theory and with reference to the advanced structure abroad, they
have a big capacity and fine separating effect.
País: | China |
N º de Modelo: | LWL300*1200 |
Precio FOB: | 30000 / Set Obtener el precio más reciente |
Lugar de origen: | China |
Precio de pedido mínimo: | 30000 per Set |
Cantidad de pedido mínimo: | 1 Set |
Detalle de embalaje: | wooden packing |
El tiempo de entrega: | 50days |
Capacidad de suministro: | - |
Tipo de pago: | - |
Grupo de productos : | decanter centrifuge |