Descripción del producto

1Product Overview

If you are interested in this product, pls + w.h.a.t.s.a.p.p.:+/8/6/**9/**6/2/4/**7
Proper installation methods:

• The infrared transceiver needs to be aligned with the infrared window of the meter.
• The infrared transceiver can be placed 0 to 5 meters away from the meter.
• There needs to be no barrier between the infrared transceiver and the meter and it needs to be visible.
• The infrared transceiver and the meter can be separated by transparent glass.
• The installation Angle is less than 5 degrees.

SC-GP-IR**5 infrared meter transceiver is a general meter launched by Shanghai Data Acquisition IOT Technology Co., LTD. RS**5 based on infrared communication, infrared meter photoelectric probe, can collect electric energy data, voltage, current, power factor and other electric parameter data of state grid electricity meter.
 Introduction to the principle of infrared meter reading: The infrared photoelectric probe can regularly read the parameter information of the smart meter through the infrared optical port and upload it. The infrared meter reader has the function of infrared signal modulation and demodulation, modulating the binary digital signal into a pulse sequence of *8 KHz frequency, and driving the infrared emitting diode to send out in the form of infrared light pulse; the transceiver converts the received light pulse into electrical signal, and then amplify, filter and send to the demodulation circuit for demodulation, restore to the binary digital signal, after the message analysis, send to the server according to the specified format (such as Json).
This product supports all kinds of meter reading scenarios of meters, gas meters, flowmeters and other meters with infrared communication interfaces. It is suitable for power meter data collection, smart city data collection, power monitoring data collection, energy saving and emission reduction data monitoring system data collection, energy consumption monitoring system data collection, photovoltaic system data collection, intelligent monitoring data collection, robot data collection, intelligent security system data collection, cloud platform system data collection; electricity meter verification and testing table; especially suitable for the lead seal of total meter of state grid of power supply bureau is completely closed, and not sealed.

2Order Specifications and Selection

Model	Transmission Mode	Characteristics of the Description
SC-LP-IRNB	wireless	NB-IOT / LoRa communication, long life lithium battery power supply, suitable for low acquisition frequency, difficult external power supply occasions.
SC-GP-IR4G	wireless	4G communication, **0V AC / *2V DC power supply, suitable for high acquisition frequency or convenient external power supply occasions. Because the device is on line for a long time by default, it can support remote configuration parameter debugging, and the site only needs to install and connect power.
SC-GP-IR**5	wired	Separate infrared probe, a ***-rpm infrared transceiver, transparent transmission. Users should consider the electricity meter agreement connection.
SC-GP-IRLAN	Ethernet / WiFi / LoRa	Infrared acquisition, network port / WiFi interface / LoRa, support for Modbus RTU protocol (virtual serial port) or Json format for data reporting.
SC-GP-IR***-modbus (Custom Edition)	wired	Infrared acquisition, RS**5 interface, universal Modbus protocol, users do not need to consider the electricity meter protocol docking.

 

3Service Concept

Our company solemnly promise you:
 You buy more than just products, but also meticulous and thoughtful technical support!!!( =^_^= )
 If you purchase our wireless products, we will provide free remote guidance, remote configuration and debugging service, and send the data to the cloud platform specified by the customer.
Free IOT solution consulting services!

4Product Features

Line Sequence Definition
Red: + *2V Black: GND Yellow: **5A White: **5B
Note: Please contact us to customize the *4V power supply version
Length of Line: 1 meter
Acquisition characteristics

• Infrared carrier frequency: *8 kHz
• Communication wave rate: ***0~*****0 bps, adaptive according to the communication parameters of the electricity meter
• Communication distance: *0 meters
• Communication Angle: *5 degrees
• Infrared communication protocol: Transparent transmission

 
       Electrical Characteristic

• Power supply mode: 5~*2V DC power supply (with reverse connection protection function of power cable)
• Working power consumption: less than 0.5w
• Emission power consumption: *0 ~ *0 *@********************rong>       Communication Characteristics
  • Transmission mode: RS**5 transparent transmission
  • Paud rate: ***0~*****0bps, adaptive
  Structural Characteristic
  • Material: ABS plastic (enclosure)
  • Protection level: IP *4
  • Body size: *8mm *7mm *5mm
  • Installation method: paste / magnetic suction installation
  Working Environment
  • Temperature**0°C~*5°C, humidity of 0~*5%
  Storage Environment
  • Temperature**0°C~*0°C, humidity of 0~*5%

  5The Core Advantages of the Product

  • Infrared non-contact acquisition, which does not affect the instrument body
  • Small size
  • Simple installation, fast deployment, help the Internet of things project quickly landing
  • Free gifts of multiple meter reading and debugging software and electricity meter communication protocol documents

  6Free Meter Reading Debugging Software

  A total of three meter reading debugging software:
   
  State grid concentrator electricity meter debugging software
   
  Multi-function electricity meter communication protocol debugger
   
  DL / T*******7
   Complimentary document: DLT*******7 multi-function electricity meter communication protocol ***0.pdf
  Software download method: follow the wechat official account "Digital", enter the product information menu, download relevant information.

  7Application Cases

   
   
   Data collection of the *0kV metering cabinet and electricity meters in the industrial park
  In this case, the power meter data of *0kV metering cabinet in the industrial park is collected by battery power supply, and the collection frequency is 2 hours each time, and the power meter data is sent to the remote server by GPRS to realize the energy consumption monitoring in the park.

  8Notes

  1. The infrared transmitting and receiving hole can be aligned with the infrared equipment that needs to collect communication. During the communication process, please ensure that the communication distance and tilt Angle are within the technical requirements, otherwise the communication effect will be seriously affected.

  País:	China
  N º de Modelo:	SC-GP-IR485
  Precio FOB:	28.8 ~ 29.8 / Box ( Negotiable ) (Negociable) Obtener el precio más reciente
  Lugar de origen:	China
  Precio de pedido mínimo:	28.8 per Box
  Cantidad de pedido mínimo:	1 Box
  Detalle de embalaje:	box
  El tiempo de entrega:	15 to 20 days
  Capacidad de suministro:	10 Box per Month
  Tipo de pago:	Other
  Grupo de productos :	-