Precio FOB
Obtener el precio más reciente500 ~ 5000 / Piece ( Negotiable )
|2 Piece Minimum Order
País:
China
N º de Modelo:
Copper mould tube brochure
Precio FOB:
500 ~ 5000 / Piece ( Negotiable )Obtener el precio más reciente
Lugar de origen:
CHINA
Precio de pedido mínimo:
500 per Piece
Cantidad de pedido mínimo:
2 Piece
Detalle de embalaje:
wooden box
El tiempo de entrega:
35-90DAYS
Capacidad de suministro:
35000 Piece per Year
Tipo de pago:
D/P, L/C, T/T
Grupo de productos :
-
Persona de contacto Ms. Michelle
chengjiang street, Wuxi, Jiangsu
Materials of CCM Copper Mould
Tube:
The materials of copper
mould tubes should be the ones with good tensile strength,
fatigue strength, proper hardness, low elongation and high heat
conductivity coefficient. As a result, material
like phosphorous
deoxidize copper (CU-DHP) , Silver bearing
(CUAG), CR-ZR-CU are widely accepted by users
worldwide.
Coatings:
Copper has lower hardness
which leads to lower anti-abrasive property. Therefore, the area
at the lower part of the moulds, where the stress increases
drastically due to shells, will be more severely worn. To
increase the life time of copper moulds, Uniform mould interior
surface plating with suitable hardness is needed. Most of the
copper mould tubes for small size billet casting are not used in
any casting system where there are rigid casting stream support,
therefore they are very sensitive to be worn. We use hard chrome
plating to increase the life of mould tubes. The plating
thickness will be controlled in the best range. Based on our
years of experience, we are able to provide Cr coating, Ni-Cr
coating, Ni-Fe coating to meet the various demands of customers
both at home and abroad.
País: | China |
N º de Modelo: | Copper mould tube brochure |
Precio FOB: | 500 ~ 5000 / Piece ( Negotiable ) Obtener el precio más reciente |
Lugar de origen: | CHINA |
Precio de pedido mínimo: | 500 per Piece |
Cantidad de pedido mínimo: | 2 Piece |
Detalle de embalaje: | wooden box |
El tiempo de entrega: | 35-90DAYS |
Capacidad de suministro: | 35000 Piece per Year |
Tipo de pago: | D/P, L/C, T/T |
Grupo de productos : | - |