Continuous Rotation Micro Servo and Wheel For Little Robotic

Descripción del producto

Need to make a tiny miniature robot moving? 
Feetech FS*0R is a micro servo rotates **0 degrees fully forward or backwards, 
You can use any servo code, 
hardware or library to control these servos. 
Good for making simple moving robots. 


Good for beginners who want to make stuff move without building a motor controller with feedback & gear box, 
especially since it will fit in small places. 
Works great with the Motor Shield for Arduino, our 2CH Servo Driver, 
or by just wiring up with the Servo library.

To control with an Arduino, 
Suggest connecting the orange control wire to pin 9 or *0 and using the Servo library included with the Arduino IDE (see here for an example sketch). 
Position "*0" (1.5ms pulse) is stop, "**0" (2ms pulse) is full speed forward,
 "0" (1ms pulse) is full speed backwards. 
They may require some simple calibration, 
simply tell the servo to 'stop' and then gently adjust the potentiometer in the recessed hole with a small screwdriver until the servo stops moving.

If you want to use it as an actuator for your miniature robot, 
you will need a wheel to go with,
*0×8 mm wheel specifically designed for use with this servo.

Make cute robots with FS*0R Servo and a couple of small wheels now!