Descripción del producto

CNHYBOND **2
Tape primer/Promote adhesion/adhesion promote
Technical Data
Product Description
CNHYBOND **2 Tape primer is an adhesion promoting primer which provides a superior adhesion after coating and drying.it can be used in conjunction with   double side adhesive(especially acrylic foam tapes to bond matterials.) to surfaces, such polypropylene，EPDM,TPU,ABS,PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces. IT is success replace : 3M K***0、3M K***0、3M ***8、、3M *4、3M***8、，it is used for solar film , windowsfilm, Auto foil, 3D Carbon Film，3D Carbon fiber sticker vinyl film, chrome Trim, Car Trim Strip, Soft PVC Decorative Line, EPDM seal strip,  EPDM seal tape(strip), Rubber seal for car truck door and window
**4 primer can be used to promote adhesion of Car Wrapping Vinyls to surfaces such as edges and deep recesses where usually you might see lifting of the Vinyls. O
Typical Physical properties and Performance Characteristics
Note:The following technical information  and data should be considered representative or typical only and should not be used for specification purposes
Solids:              Approximately 5%*8%
Color:              yellow
Flashpoint:          -4℉(**0℃)
Net Weight:         ******0grams per liter
Viscosity:           *0±5cps
Application Techniques
Surface preparation:
The bonding surface must be relatively clean and dry.Contaminated surfaces should be cleaned with a *0/*0 Isopropyl Alcohol and water mixture,A clean lint-free cloth should be used.
Application:Shake CNHYBOND **2 primer well before using:
Apply a thin uniform coating to the bonding surface using the minimum amount that will fully coat the surface, allow cnhybond **2primer to dry thoroughly before applying tape. This is usually accomplished in ***0minutes at room temperature, Be sure the primed surface remains free from contaminants prior to applying the tape. Porous surfaces may require 2 application of CNHYBOND **2 primer for uniform coverage and good adhesion..
Allow first application of primer  to dry before applying the second coat, CNHYBOND primer **2 may be applied with brush or swab, It can also be applied with a pressurized flow gun, knurled roller or other similar type of application equipment
Clean up:
Cnhybond **2 primer can be removed with isopropyl alcohol,Vigorous scrubbing may be required