Precio FOB
Obtener el precio más reciente2 ~ 50 /
|100 Piece Minimum Order
País:
China
N º de Modelo:
-
Precio FOB:
2 ~ 50 / Obtener el precio más reciente
Lugar de origen:
Zigong
Precio de pedido mínimo:
2
Cantidad de pedido mínimo:
100 Piece
Detalle de embalaje:
-
El tiempo de entrega:
20
Capacidad de suministro:
2000 Kilogram per Month
Tipo de pago:
Western Union, L/C, T/T
Grupo de productos :
-
Persona de contacto John
Hotel plaza, Zigong, Sichuan
Cemented carbide indexable
inserts
Other Related rpoducts:
        CNMG CCMT CNMM DNMG
         DCMT SNMA SCMW SNMG
         TCMT TNMG TNMM TPGN
         VBMW VNMG WNMA etc.
 All kinds of types with different grade. A Brief introduction of Grade:
Â
Â
| ade | Typical property values | Performance & Applications | Equivalent | ||
| Density | Bending | Hardness | to ISO | ||
| Strength | Â | ||||
| g/cm3 | N/mm2 | HRA | |||
| YT*0 | 9.5 | ***0 | *2.5 | Wear resistance and cutting speed higher than YT*5 but strength and impact toughness comparatively lower. Finishing of carbon steel and alloy steel, for instance fine turning, fine boring or fine reaming of their small chip sections | P*5 |
| YT*5 | *1.3 | ***0 | *2 | Wear resistance higher than YT5,but impact toughness lower than YT5.Semifinishing of the medium chip sections of steel, cast steel and alloy steel or finishing of their small chip sections. | P*0 |
| YT*4 | *1.4 | ***0 | *1.5 | High strength in use and good impact & shock resistance, yet lower than YT5,Rough turning and rough milling of carbon steel and alloy steel during continuous cutting or medium to fine turning of them during intermittent cutting. | P*0 |
| YT5 | *2.9 | ***0 | *0.5 | Best strength and height impact & shock resistance among W-Co-Ti alloys but wear resistance comparatively lower. Rough turning, rough planning and half precision planning of carbon steel and alloy steel (including forged steel parts, stamped parts and cast iron surfaces). | P*0 |
| YT**5 | *1.3 | ***0 | *2 | High red hardness and wear resistance. Medium finishing to finishing of alloy steel with high strength. | P*0~P*0 |
| YT**2 | *1.8 | ***0 | *2 | High wear resistance and excellent impact toughness. Machining of steel with high strength, manganese steel sheets and stainless steel, | P*0~P*0/M*0 |
| YT**7 | *2.2 | ***0 | *2 | High wear resistance with desirable comprehensive properties Machining of alloy steel with high strength, speed steel and steel, | P*0/M*0 |
| YT**8 | *3.2 | ***0 | *2 | High hardness under high temperature and high wear resistance Continuous or intermittent cutting of steel with super strength. | P*0~P*0/M*0 |
| YT**8 | *2.3 | ***0 | *1.5 | High toughness and high resistance to thermal shock and plastic deformation. Milling of alloy steel, tool alloy steel, manganese steel and stainless steel. | P*0~P*5/M*0 |
| YT**7 | *3.1 | ***0 | *2 | High wear resistance and high resistance to plastic deformation Continuous or intermittent cutting of manganese steel and stainless steel. | M*0~M*0 |
| YT**6 | *4.2 | ***0 | *2.5 | High red hardness and wear resistance. Turning and Milling of chilled cast irons, cast alloy irons and quenched steel. | K*5~K*0/M*0 |
| YT6S | *3.5~*4.7 | ***0 | *1 | Having the same wear resistance as YG6X but higher toughness. for tobacco cutters and rough and finish milling of cast iron. | K*0 |
| YT**0 | *2.4 | ***0 | *1 | Better, toughness, wear resistance high impact resistance thermal cracking resistance, and plastic deformation resistance for rough turning, milling and planning of steel, esp. forgings and castings scales. | P*5~P*0 |
| YT**0 | *2.8~*2.*5 | ***0 | *1 | High toughness. wear resistance and heat shock resistance. for milling and medium speed and full-feed turning of steel, cast steel, alloy steel, stainless steel and hi-Mn steel. | P*0 |
| YT**9 | *2.4~*3.4 | ***0 | *0 | Of higher impact toughness than YT**8, for vertical rough milling cutters, indexable shallow hole drills, saw web and cut off tools for machining of high strength steel and quality alloy steel. | P*0~P*5 |
| YT**5 | *2.7 | ***0 | *0.5 | Wear resistance red hardness better than YT**0 and high strength in use. Continuous rough turning and milling of cast or forged steel. | P*5~P*5 |
| YT**0 | *2.6 | ***0 | *0 | Good' toughness and good shock resistance. Suitable for low to medium speed cutting. | P*0 |
Â
Â
Â
Â
We can aslo design and manufacture any produce according to your specific needs.
| País: | China |
| N º de Modelo: | - |
| Precio FOB: | 2 ~ 50 / Obtener el precio más reciente |
| Lugar de origen: | Zigong |
| Precio de pedido mínimo: | 2 |
| Cantidad de pedido mínimo: | 100 Piece |
| Detalle de embalaje: | - |
| El tiempo de entrega: | 20 |
| Capacidad de suministro: | 2000 Kilogram per Month |
| Tipo de pago: | Western Union, L/C, T/T |
| Grupo de productos : | - |
