Car Paint Pen Professional Car Coat Scratch Patching Paint Pen

Descripción del producto

Specification:
Brand: ALL BOATS
Name: Scratch Patching Paint Pen
Color: Special Car Color
Capacity: About *6ml
Spray Area: About *0**0cm

Note:
1. Shake up and down for more than *0 seconds before use, which is more conducive to repair.
2. Repeat the color after the paint is dry.

Set Series:
1. Cover Rust Suit
Products: Repair paint pen, Ashing board, Abrasive paper*2

2. Fill and Repair
Products: Repair paint pen, Ashing board, Abrasive paper*2, Filler, Wipe paper, Small scraper

3. Self-painting Scratch Patching Simple Suit
Products: Spray irrigation, Repair paint pen, Varnish, Thinner, Fade-out thinner, Textured paper, Wipe paper, Disposable masks and gloves, filler, Repair tool product(anti-clogging needle, ashing board, small scraper, abrasive paper*2, straw*4)

4. Self-painting Scratch Patching Standard Suit
Products: Spray irrigation, Repair paint pen, Varnish, Thinner, Fade-out thinner, Brightening wax, Sponge ball, Track cloth, Masking film, Textured paper, Wipe paper, Disposable masks and gloves, filler, Repair tool product(anti-clogging needle, ashing board, small scraper, abrasive paper*2, straw*4)

5. Self-painting Upgrade Suit
Products: Spray irrigation*2, Repair paint pen*2, Varnish*2, Thinner, Fade-out thinner, Brightening wax, Sponge ball, Track cloth, Masking film, Textured paper, Wipe paper, Disposable masks and gloves, filler*2, Repair tool product(anti-clogging needle, ashing board, small scraper, abrasive paper*2, straw*4)

Self-painting Instructions
1. Sandpaper wrapped ash board, sanding scratches.
2. filler the scratches.
3. Cover other parts with masking paper and textured paper to prevent splashing.
4. Wipe the scratches with track cloth to increase paint adhesion.
5. Shake the scratch patching paint pen evenly, then load it into the spray irrigation.
6. Align the scratched area and evenly spray.
7. Replace the straw, load the varnish in the same way, and spray the repaired part quickly 1~2 times.
8. load the fade-out thinner in the same way, and spray **2 times evenly on the edge of the scratched area.
9. Polished with brightening wax and sponge ball after *4 hours