Descripción del producto

Product Descripition

• 1. High capacity*- ****0mAh Multi Funcation Car Jump Starter;
• 2. Safe product*- with protection board, which has the function of over-charge, over-discharge, over-current, short-circuit protection etc;
• 3. Durability*- once full-charged, the jump starter can start the the car more than *0 times, peak current can reach **0A;
• 4. Long cycle life*- with lithium polymer cells, the cycle life can reach ***0 times;
• 5. Outdoor lighting & flash signal;
• 6. Fast charge*- with 1A constant charge current, the charge time is about only 6 hours;
• 7. Small size & light weight;
• 8. Broad application*- can apply to laptops, cellphones, digital products etc;
• 9. Long warranty***2 months;
• *0. Supply OEM & ODM and custom service.

• 1.All our inside battery are A grade one comes from GREPOW.One professional manfacture for li-polymer battery.
• 2.The material of the device shell,also be the envivometal protection material 
• 3.Certificate:CE/FCC/RHOS,Certificate for inside battery :MSDS UN*8.3 IS***1.
• 4.Warranty:*2 monthes,Defective products could be send to our factory for a new one within *2 monthes (Doesn't contain artifical damage.

• Charging for starter itself?
• 1. Plug the home adaper into the universal socket. 
• 2. Connect *5V 1A port of Jump Start to the other end of the home adapter.
• Or
• 1. Plug the car adapter into the socket of the cigarette lighter.
• 2. Connect *2V 1A port of Jump Start to the other end of the car adapter. 
•  
• For Jump Start of *2V vehicle ?
• 1.Make sure that the the number of indicator light is not less than 3.
• 2.Connect the red battery clamp of jump cable to the vehicles positive (+) battery terninal and connect the black battery clamp of jumper cable to the vehicels negative(-) battery terninal.
• 3.Plug the cord of the jump cable into the jump start socket. 
• 4.Start the vehicle.
• 5.When the vehicle start, remote jumper cable from jump starter and disconnect red and black clamps to the vehicle battery terninal within *0 seconds. 
• 6.Leave the verhicles engine running. 
•  
• Charging for mobile phone or tablets?
• 1.Plug the switch cable B to USB 5V 2A output port.
• 2.Select the appropriate connector for your mobile phone or tablet, connect it to the switch B cable with your cell phone or tablet. 
• 3.Press the switch to charge.
•  
• Charging/power supply for notebook ?
• 1. Select appropriate connector for your notebook and connect it to the switch cable A and your notebook. 
• 2. Press the switch to charge/power supply.