Car Air Purifier

Eight Air Purification Technology System

1.     Nano plant fiber filter technology

Adopt nano plant fiber, the dust arrestment rate arrives at *0%. Based on its’ physical characteristics of air permeability and high density, filter the dust, particles in the air.

2.     Powerful Crystal active carbon adsorption technology

Using granular crystal active carbon with the most powerful adsorption capacity and air permeability. Effectively dispel most odorous substances in the air, tiny particles, harmful gas, formaldehyde, benzene, amine gas, etc..

3.     Hospital grade HEPA filter technology

Adopt the international air purification technology ,the most mature, widely used, top purify class and Hospital grade HEPA filter. It can filtrate small particle with the size less than 0.3 micrometer, and *9.*7% Organic molecules.

4.     Nano TiO2 photocatalysis technology

Adopt high active nano photocatalysis net. Under the irradiation of UV lamp, it has a superior oxidation reduction. And rapidaly decompose formaldehyde, benzene, ammonia and other harmful gas molecules, kill all kinds of baterias.

5.     UV lamp technology

Kill the bacillis in the air, and enhance photocatalyst purification effect.

6.     Natural plant fragrance technology

Use low-volatile perfume extracted from natural plant- tea oi, Enjoy the sweet fragrance like in garden.

7.     Pulse-type anion technology

Integrate the pulsed current technology and anion Technology, Release 5***6pcs/sec anion-Air vitamin. Increase the oxygen content of the human body, clean the air, refresh your mind. Kill bacterias, filter dust and sterilizer.

8.     double speed fan air circulation power systems

Unique double fan, Two-step adjustable wind power systems. It effectively improve the purifying rate.

 

 

Three Intelligent Control Technology

1.     Timer control

Apply the timming technology to the built-in microcomputer intelligent chip, to control the switching time of the machine. It can be set up according to individual needs. Auto Switch reservation twice per day. You can enjoy the fresh and clean air in the car when open the car door.

2.     Remote control

Apply the remote control technology to car air purification technology, Only press the remote control to turn on the machine within the range of 5m. It make the car air purifier much more humanization and automation.

3.     Intelligent memory technology

After working continuously 2 hours, and then shut off automatically. Avoid the waste of electric energy caused by the users who forget to turn off the machine when leave the car.

1

Features

1.     Strong Power

Powerful double fan, high air delivery rate, Two-step adjustable Airflow. It can purify the car air *2 times per hour. Long usage life **8years.

2.     Big LCD display

Original Lig LCD screen display, vivid operation menu, adjustable Background light .

3.     Silent Running

Noise<*5DB.

4.     Natural plant fragrance

 

Authoritative certificate, Effective function  

It can kill a various of harmful contaminations in the car:

Pet odor, smoke, body odour, bad smell, mild, bacteria, bacteriophankton, pollen, dust, scurf, formaldehyde, benzene, toluene, dimethylbenzene, TVOC, and other Automobile exhaust gas, like CO, CO2,  NOx,etc

 .

Technical Data  

Product size: **8***0**0 mm                           Purification Equipment

Rated voltage: DC *2V                             Photocatalysist net: **0***0*4 mm

Airflow: *5m3/h, *5m3/h                            UV bulb: 1pc **5nm,length **0mm

Pre-filter: **0***0*3 mm                           Negative ions: 5***6pcs/cm3

Activated carbon/ HEPA filter:                       Ozone: **0mg

**0***0**0 mm                                   Plant perfume: Ocean (refer to the real product)

Noise level: < *5db

Power: <8W

LED display: 2 colors (blue, white)

Remote control: YES

Power Supply: main power (car lighter)

 

Usage Scope     

Saloon car, Commercial vehicle, Off-road vehicle, Minibus, Bus, etc..

 

Product configuration  

 

ACRYLIC glass surface

piano coatings

Touch

 Black metal mesh

 ABS casing

 

Machine and assessories

 

 Remote control

DC*2V  DC *2V wire of cigarette lighter                          2

cell ( for remote control)

   plant perfume

  magic buckle

  user manual

3

 

Powerful *-layer Purification technology

 

 Air

Air net

 Pre-filter

 activated carbon net (middle filter)

 HEPA filter

  Photocatalyst

UV lamp & ionizer (inside)

 scent spong and metal frame

 Air output on both sides

4

 

 

Diagram of the Front side and lateral side

 

Power

Timer

Fan

lock

Anion

O3

Air Flow

Pre-filter

Pre-filter replacement indicator

AC

Activated carbon replacement indicator

HEPA

HEPA net replacement indicator

DC*2V     DC *2V

5

Instructions:

 

一1.1Power on

Connect the adapter, push the ON/OFF or 图标 on the controller

The device get into the working mode. The negative-ion generator and UV-lamp will work after one minute. The signs on the LCD show the working situation.

 

1.2 Power off

If the device is working,Push the ON/OFF or 图标on the controller,then it will power off.

 

1.3When you gett off the car, There are two situation thatThe devise will keep working:

1.When the lighter-cigarette in car still has the power output

2.If the power is provide directly by the battery in the car

 

 Timer setting

Push the timer setting on the controllwer,then get into the timer setting of the ozone

Then push the 图标/图标,to select 5minutes/*5minutes/*0minutes/*5minutes. After set the time, press the confirm butoon,now the ozonator is working. It will automatically stop working when the time is over.

If you don’t set the time,but just press the confirm on the controller,  the ozonator will keep working for 5minutes, then it automatically stop working.

 Timer setting power off

The device will automatically power off after two hours continuously working.( default set)

 

 Timer setting display

When the device working after the timer setting, the LCD will show the surplus time. For example, if you set the time *5minutes and till now it has worked for 1minute and *0 seconds,then the LCD will shou the suplus time *3:*0.

 

 Setting for air flow

2.1 Press the Air speed on the controller, It can change the high speed and low speed for air flow

1. When LCD shows 图 running fast,The led light is on at the eighth frame, the air flow is in the high speed.

2. When LCD shows 图 running fast,The led light is on at the sixth frame, the air flow is in the low speed.

 

6

 

 Check the timer setting

5.1 If you don’t set the time,then There is no signal for the timer setting on the LCD

If you have set the time,The LCD will show 图标（ 1.2.3.4 will show according to the time you select）

5.2 When check the time you have set, please press the 定时 on the controller. You can also sellect ******4 to change the working time you need. When time is over, the ozonator will automatically stop working.

 Display setting

Press the 显示 on the controller, The color for the LCD can be chose either blue or white.

 Timer setting power off

The device will automatically power off after two hours continuously working.( default set)

 

 Reset

The machine is working, the indicator of pre-filter, AC and HEPA has no sign. When the filter’s cumulative working time is beyond its’regulated using life. The relevant indicator will be twinkling and remind you to replace the filter. After replacing the filter, press ‘RESET’ . The indicator will stop twinkling. And then recount its’ cumulative working time.

 

 Beeper

Eeverytime when you press the both on the device and the controller, it will beeper for once.

 

After open the cover of the device, the device will automatically shut off, it is the safe switch that set inside.

                                                     

7

 

Diagram of installation

 The place of round pad

* If you think the round silicon pad can be anti-slip, u can not use the magic buckle ( not recommend)

* Using the magic buckle, it’s necessary to remove the round silicon pad

 

   hook side

   matte side

l       remove the release paper from the hook side of the magic buckle. Paste it on the machine (as illustrated in this picture)

l       remove the release paper from the matte side of the magic buckle ( match with the hook side), and then install this machine in the backside (as illustrated in this picture). And then press on the surface of machine, to make sure that the 3M glue on the matte side is pasted in the car tightly

l     If want to take off this machine. Lift the machine from one side

l     If reintall this machine in the car, make sure that the matte side match with the hook side tightly

8

 

Installation and Replacement of filters

Unpack the filters from packing bags in the initial use

  Open the cover

 hand position

  belt

 extract 

   Action 1: insert

  Action 2: depress

 

Take off pre-filter, activated carbon net, HEPA filter step by step

 

 

Pull both sides of hand position until the backoff  get out of the machine. Then pull and extract the air net.

 

 

After replace the filters, install the air net, refer to the picture

9

 

 

Installation and Replacement of battery and perfume

l     Hold the battery cover with your thumb (as illustrated in this picture), take out the battery cover and battery.

l     After loading the battery, and then reinstall the battery cover. (as illustrated in this picture).

l     Open the air net, take out the scent spong from the metal frame, and then drop some perfumes. And then reintall it. The installation and replacement of air imput net is the same as filters ( refer to page 9)

 

*0

 

Routine Maintenance and Common Trouble Shooting

 

Machine: This machine is equiped with ionizer, easy to adsorb the dust. Please wring the cloth with detergent water for cleaning at regular intervals. Clean the air delivery with brush.

Filter:Time of replacing the filter is setup in the program. The replacing cycle of pre-filter is ***0hrs. Activated carbon net ***0hrs. HEPA net ***0hrs. The replacing cycle depends on the circumstance, and also depends on the noise and smell from this machine. Filters can be purchased at the authorized distributor/ dealer.

UV lamp:The usage life of UV lamp is above 3years. Please don’t disassemble the UV lamp without authorization. If there is damage, plz replace it at the authorized distributor/ dealer.

Perfume:The car perfume is specially provided by manufacturer. It can be purchased at the authorized distributor/ dealer.

 

ANY PROBLEMS?

LCD screen no display:  please check whether the power wire is connected

The indicator of filter twinkling: The cumulative working time is beyond regulated using life. Please replace the filters. And press the REST to restart timing

Low airflow or loud noise: There is too many dust accumulated on the filters, due to the strong resistance. Please replace the filters.

UV lamp no working: Maybe the plug-in board is loose, and poorly connected; Or UV lamp is broken, plz replace it at the authorized distributor/ dealer.

Timer no working or Purification working time is short: Plz check whether the car cigarette ligther is working.

 

In case of any problems after the above inspections, Please take this unit to the authorized distributor/ dealer.. Please don’t disassemble it without authorization.