BT-HER MACHINE CHUCK COLLET TOOL HOLDER

Descripción del producto

基本材质（Material）：低碳合金钢*0CrMnTi
刀柄硬度（Hardness）：*8±2HRC
锥体精度（Taper）：≤AT3
表面粗糙度（Ra）:＜0.5
渗碳深度（Depth of Carburizing）：0.8mm±0.2mm
本体跳动精度（Run-out Accurancy）：≤2μ
综合精度（T.I.R Accurancy）：≤5μ
转速（Revolving Speed）：≤****0rpm
刀柄精密动平衡（Bal/rpm）：G2.5/****0rpm
介绍：
（1）对筒夹进行双面加压，使其获得强大的扭矩。
By press on two side of collet to obtain strong torque.
（2）可搭配三点固定式六角螺帽和两点固定式全圆螺帽。
Matched with three-point fixed hexagon nut and two-point fixed all round nut.
（3）设计了独特的双层定位式的夹紧方式，增加了螺纹前后端止动台，提高刀柄*0%刚性，防震刀，并有优良的防尘效果。
Designed with the unique double-layer positioning clamping mode on HER nut and tool holder for eliminating gap.
（4）弹性筒夹具有弹性，适合夹持钻头、铰刀、铣刀及攻丝刀具等。
ER collet holder with flexibility that can clamp drill, reamers, end mills and taps
 
注意事项：
1. é™„带螺帽。筒夹、扳手、轴向调节螺丝请另行订购
Nut is supplied, Collet,Wrench need to be ordered separately
2. å¸¦å†…冷孔，可配合ER止水筒夹使用中心内冷
By assembling ER coolant type collet, can be used for coolant thru.
3. æ³¨æ„ï¼šä½¿ç”¨æ—¶çš„转速受机床刚性和刃具平衡性的影响较大，因此请将机床转速从低速开始，缓慢调整至合适的转速。
Pay attention:The rotation speed in use is greatly affected by the rigidity of the machine tool and the balance of the cutting tool. Therefore, please start from the low speed of the machine tool and slowly adjust it to the appropriate speed.