Descripción del producto

BLUETOOTH DALI ***0V
*BLUETOOTH INTERFACE TO
DALI AND ***0V (***0V)
*DALI INTERFACE TO ***0V

***0V MAX SINK CURRENT:  *0MA

This module enable bluetooth
Supported device such as desktop,
Portable and pocket PC, intelligent
Mobile phone( Wince, Android, Iphone
etc.) connected to DALI and ***0V
network in *0 meters distance
wirelessly. People can easy to
address the DALI ballasts, set                    SIZE:  D *0mm x H *0 mm
the parameters of DALI ballasts,
control DALI lightings and ***0v
lightings through this module.

The ***0V function will take one of DALI address. It can be addressed , parameters set ,inquired and controled similar to a DALI ballast.
When connected to DALI network, the ***0v function can be controled by commands from both bluetooth and DALI line (from other controller).
When not connected to DALI network, the ***0v dimming function is enabled by bluetooth control only when setting parameter DALI line power failure level to **5.
.
Power supply please use high quality well isolated and low wrinkle DC *5V or *6V transformer.
***0V line is conducted with power supply.
DALI line is isolated to power supply in default. But if use the power supply of this module as power source of DALI line, it will conducted.
DALI line can be powered by power supply of this module with max current of **0ma by following steps:
1. open bottom plastic cover.
2. solder conducted wires between two pairs of pads in parallel on the PCB.

( connect between 1,2 and connect between 3,4 as in photo to power DALI line from DC source)

Note: one DALI line can only have one power source. Directly connect transformer to DALI line is absolutely not allowed.

LED light meaning:
Red:  DALI line communication status
Green:  bluetooth communication status