Descripción del producto
Technical
parameters:
i. Supplied power:
AC**0V *0HZ
ii. Power:
6KW
iii. Rate(Efficiency):
******0pcs/minite
iv.Weight:
**0KG
v. Overall dimensions:
***0***0****0MM
Process
Flow:
PE
Film
Adgefolding-Seaming-Conveying-Folding-Conveying-Seaming-Cutting-Finshed
Products
Elastic
ring
Operating
Procedure:
i.Put PE film on the material feeder and
the adjust the swelling device.
ii.Pulling and guiding the film into the
seaming device through the edge-folding device by
manual.
iii. Feeding the elastic ring and guiding
it to the ultrasonic seaming machine, avoiding the elastic ring
springback(Return to the normal condition)
iv. Switch on the ultrasonic seaming
device as well as the main motor gradually and slowly.Than make
adjustment of the seaming rollers’ pressure, which can be used to
seam both ends firmly.
v.Adjusting blade place for ensuring the
accrate cutting place of the products.
Attention:
i.Ultrasonic seamer must be switched on
earlier than the main motor, avoiding burning out the ultrasonic
seamer due to overburden.
ii. Raw materials should be guided to the
seaming mould by manual while switching on the main motor for
ensuring normal production.
iii. The pressing wheel’s
force should be medium. If it is too large, the ultrasonic device
will be burnt out. To the opposite, it can’t be pressed
fiormly.
iv. The pull of elastic ring should be
balanced, otherwise it can’t be folded
well.
v. All bearings should be checked
regularly, including the lubricating oil.
vi. All parts’
pressure, such as seaming and cutting part, should be
adjusted properly for reducing the whole
line’s load.
Maintainance
1.Checking the blade regularly and make
maintainance on time if broken.
ii. Checking the seaming
rollers’ condition and adjust the
pressure properly to the minimum degree for guaranting the normal
seaming.
Iii. Checking all
feeders’ swelling on time for meeting the
requirement of normal production.
iv. The pressure of the blade should be
medium, otherwise the blade will be rubbed and
touched.
v. Adding lubricating oil into the bearing
for the pressing wheel and checking its running and normal
condition.
vi. Checking all parts
running condition regularly and whether it runs normally or
flexibly.
| País: |
China |
| N º de Modelo: |
JY-P
|
| Precio FOB: |
9000 / Set (Negociable)
Obtener el precio más reciente
|
| Lugar de origen: |
China |
| Precio de pedido mínimo: |
9000 per Set |
| Cantidad de pedido mínimo: |
1 Set |
| Detalle de embalaje: |
standard export wooden package |
| El tiempo de entrega: |
15days after receipt of repayment |
| Capacidad de suministro: |
2 Set per Month |
| Tipo de pago: |
T/T |
| Grupo de productos : |
non-woven fabric related machine
|
