Descripción del producto

Glass mosaic with soft colors, simple, elegant, beautiful with good chemical stability, good temperature stability. furthermore, there are no color change, dust-free, light capacity, and strong bonding to adhesive, suitable for many   interior parts, such as decorative balcony. Its compressive strength, tensile strength, bloom temperature, water-resistance, acid resistance are very strong.

Mosaic installation instructions
A, the surface treatment:

Before installation should ensure that the first mounting surface grassroots level off, obligate installation position should be more than required Mosaic thickness **5 MM. Before the shop is stuck should do a comprehensive cleaning work, all surface should be strong, clean, not rock, no pollution and other loose materials; Paint or very smooth surface should be do rough treatment; Base material loose and powerful water imbibition or surface floating dust cleaning thoroughly remove dirt difficult to surface, can just apply to the treatment of the interface Mosaic paste.
Second, the shop is:

Before the installation, should according to the installation drawing construction area is larger, the shop when combined with Numbers schematic diagram joining together. Ensure that the mounting surface Mosaic and the coordination of the actual size. The shop in the middle of the joining together when such as part have crack, should be within the Mosaic on both sides of the glue and yarn nets cut cleared, do so within the aperture normal coordination.
In the installation of a line or mark on auxiliary, ensure that can accurately fixed every Mosaic position.
Three, the shop is stuck:

**3 MM serrated offset spatula will bind evenly on grassroots, ply with 3 to 5 MM is advisable.
The single pieces of Mosaic aligned according to drawing aperture, in combed binder. Two pieces of the gaps between the, usually with every piece of should be on the small grain in accord with the gaps between the.
Will level off planks in the Mosaic on the surface, mat with rubber hammer uniform knock, ensure that sticky meet firm. In case of a single Mosaic too high or bottom, must be pulled out the particles to reduce or increase with the adhesive methods make level.
If installed surface for metope, in principle to spread from the stick, and one-time can't shop sticks is too high,

In case of large weight caused, and please use chunks auxiliary support make its clingy metope, and has a certain initial strength rear can take down support.
Application in water environment, have to be waterproof, prevent processing, and suggest using good waterproof properties of special binder and seam filling agent.
Four, seam filling:

To the dry and a moderate water after the initial strength, wet sponge soft cloth clean surface, then garnish with Mosaic clean dry cloth to wipe, and begin to fill in the seam.
To use woodiness or rubber offset spatula will fill in the gaps seam an agent into Mosaic. When you finish, seam an agent filling water moderate the initial strength with dry already can begin to clean up. More courage up to seam filling agent less than 1 MM or so, Mosaic surface with dry soft cloth the surface cleaning up again until the surface clean.
Five, maintenance:

Installation ends, archaize Mosaic to play waxing water, in order to enhance its colour and lustre; Polishing Mosaic can protect, spraying increase photometric, maintenance the effect of Mosaic; Metal Mosaic may appear oxidation etc. Phenomenon, to finally cleared can.
 

País:	China
N º de Modelo:	jsm-g038/jsm-c042/jsm-c022jsm-026/j
Precio FOB:	51 / Square Meter (Negociable) Obtener el precio más reciente
Lugar de origen:	china foshan nanhai
Precio de pedido mínimo:	51 per Square Meter
Cantidad de pedido mínimo:	72 Square Meter
Detalle de embalaje:	11 sheets/Box（1.00squm carton） or custom package
El tiempo de entrega:	about ten days
Capacidad de suministro:	20000 Square Meter per Month
Tipo de pago:	T/T
Grupo de productos :	crystal mosaic tile