Precio FOB
Obtener el precio más reciente100 ~ 2000 USD / Unit
|1 Unit Minimum Order
País:
China
N º de Modelo:
QBY
Precio FOB:
100 ~ 2000 USD / Unit Obtener el precio más reciente
Lugar de origen:
-
Precio de pedido mínimo:
100 per Unit
Cantidad de pedido mínimo:
1 Unit
Detalle de embalaje:
STANDARD EXPORT PLYWOOD CASE
El tiempo de entrega:
3-10 DAYS ACCORDING TO ORDER
Capacidad de suministro:
5000 Unit per Month
Tipo de pago:
T/T, L/C, Western Union
Grupo de productos :
-
Persona de contacto Jennifer
no 780, Oubei Road, Oubei Town, Yongjia, Wenzhou Cticy, Zhejiang Province , China, Wenzhou, Zhejiang
Brief Instruction:
QBY Pneumatic Diaphragm Pump is the newest conveying machine, adopting compress air, smoke and industry exhaust gas as power source. Diaphragm pump can exhaust all the medium kinds of liquid, which are strong viscous, volatile, corrosive, toxic, colloids and liquid with grain.
Addvantages:
The biggest advantage is no needing water to drain, high suction head. It can transport high vicosity liquid. It conbines advantage of self-priming pump, submersible pump, slurry pump, impurity pump, canned-motor pump, etc.
Material:
Pump body: aluminum alloy, cast iron, stainless steel, engineer plastic or tetrafluorohydrazine.
Diaphragm: NBR, NEOPRENE, fluorine rubber or PTFE.
Usage:
1. Food: peanut butter, kraut, mashed potato, little intestines, Confiture, chocolate, hop, baking powder, syrup and gooey, etc.
2. Chemical: strong acid, alkali, corrosive, viscous, volatile, toxic, milling things, dirty oil, paint, colophony, dye, bond and glue water, etc.
3. Other sewage, slurry and so on.
| Performance parameter | ||||||||||||
| Model | Discharge (m3/h) | Head (m) | Exit pressure (kgf/cm2) | Sucked lift (m) | Max grain Dia (mm) | Max pressure (kgf/cm2) | Max air consumption (m3/min) | Material | ||||
| Aluminum (ZL**4) | Stainless Steel (1Cr*8Ni9Ti) | Cast Iron (HT**0) | Enhanced Polypropylene | Fluorin-lining in filtrated part (F*6/EFP,PO) | ||||||||
| QBY**0 | 0~0.8 | 0~*0 | 6 | 5 | 1 | 7 | 0.3 | ♦ | ♦ | ♦ | ♦ | / |
| QBY**5 | 0~1 | 0~*0 | 6 | 5 | 1 | 7 | 0.3 | ♦ | ♦ | ♦ | ♦ | / |
| QBY**5 | 0~2.4 | 0~*0 | 6 | 7 | 2.5 | 7 | 0.6 | ♦ | ♦ | ♦ | ♦ | ♦ |
| QBY**0 | 0~8 | 0~*0 | 6 | 7 | 4.5 | 7 | 0.6 | ♦ | ♦ | ♦ | ♦ | ♦ |
| QBY**0 | 0~*2 | 0~*0 | 6 | 7 | 8 | 7 | 0.9 | ♦ | ♦ | ♦ | / | ♦ |
| QBY**5 | 0~*6 | 0~*0 | 6 | 7 | 8 | 7 | 0.9 | ♦ | ♦ | ♦ | / | ♦ |
| QBY**0 | 0~*4 | 0~*0 | 6 | 7 | *0 | 7 | 1.5 | ♦ | ♦ | ♦ | / | / |
| QBY***0 | 0~*0 | 0~*0 | 6 | 7 | *0 | 7 | 1.5 | ♦ | ♦ | ♦ | / | / |
| Note: ♦ -have /-without | ||||||||||||
| Characteristic of diaphragm | |||||
| Medium Variety | Nitrile Rubber | Chloroprene Rubber | Fluorine Rubber | PTFE | Food Rubber |
| Smoke nitric acid | × | × | ◊ | ◊ | |
| Density nitric acid | × | × | ◊ | ◊ | |
| Density sulfuric acid | × | × | o | ◊ | |
| Density hydrochloric acid | × | ◊ | ◊ | ◊ | |
| Density phosphoric acid | × | ◊ | ◊ | ◊ | |
| Density acetic acid | × | × | × | ◊ | |
| Density sodium hydroxide | o | o | ◊ | ◊ | |
| Non-aqueous ammonia | ◊ | ◊ | ◊ | ◊ | |
| Thin nitric acid | × | × | o | ◊ | |
| Thin sulfuric acid | ◊ | ◊ | ◊ | ◊ | |
| Thin hydrochloric acid | × | o | ◊ | ◊ | |
| Thin phosphoric acid | × | × | ◊ | ◊ | |
| Thin sodium hydroxide | o | o | ◊ | ◊ | |
| Liquid ammonia | ◊ | ◊ | × | ||
| Benzene | × | × | o | o | |
| Gasoline | o | o | o | o | |
| Petroleum | ◊ | × | o | o | |
| Carbon tetrachloride | o | o | o | ||
| Carbon disulphite | o | × | o | ||
| Alcohol | o | o | o | o | |
| Acetone | × | ◊ | × | o | |
| Cresol | × | ◊ | ◊ | o | |
| Acetic aldehyde | × | × | ◊ | o | |
| Ethylbenzene | × | × | ◊ | o | |
| Acrylonitrile | ◊ | ◊ | × | o | |
| Butanol | o | o | o | o | |
| Butadience | o | × | ◊ | o | |
| Styrene | × | × | ◊ | o | |
| Vinyl acetate resin | × | × | × | o | |
| Ether | × | × | × | o | |
| Note: o-means the long service life, ◊-means common service life,×-means use forbidden. This table is only considered from the anti-corrosion. Because the PTFE elasticity is worse than that in rubber. The actual use life will be affected because of the pressure and pump stroke factors. The food rubber specially uses for beverage industries. | |||||
| País: | China |
| N º de Modelo: | QBY |
| Precio FOB: | 100 ~ 2000 / Unit Obtener el precio más reciente |
| Lugar de origen: | - |
| Precio de pedido mínimo: | 100 per Unit |
| Cantidad de pedido mínimo: | 1 Unit |
| Detalle de embalaje: | STANDARD EXPORT PLYWOOD CASE |
| El tiempo de entrega: | 3-10 DAYS ACCORDING TO ORDER |
| Capacidad de suministro: | 5000 Unit per Month |
| Tipo de pago: | T/T, L/C, Western Union |
| Grupo de productos : | - |
