Aerated Concrete Block Machine or AAC block machine

Descripción del producto

With an annual output of *****0 square equipment aerated concrete and production technology
Medium-sized aerated concrete production line
The annual output of *****0 cubic aerated concrete production line mainly has: Material handling equipment, batching and pouring equipment, cutting equipment dust removal equipment consisting of steam-cured. With simple and convenient operation, high yield etc...The use of the ground turning cutting, the device on the body as the introduction of the two turn, six surface cutting, trapped the arts advanced, not two hoisting, reduces the trapped repeatedly lifting on the body damage.
Aerated concrete block production process
Aerated concrete equipment based on the raw materials category, quality, main process characteristics, adopt the different production process. But in general, the fly ash or sand adding water into a slurry, adding proper amount of powdered lime, cement, gypsum and a foaming agent, stirring after injection into the mold frame, static oxygen blowing after curing, cutting into a variety of specifications block or plate, by steam curing car into the autoclave in high temperature saturated steam curing condition, in the that the formation of porous light aerated concrete products.
The aerated concrete production process and sand aerated concrete production line equipment and other technology are to achieve industry-leading level.
Aerated concrete equipment production line of
According to the raw material category, quality, main process characteristics, adopt the different production process. But in general, sand aerated concrete is the river sand, lime, gypsum and cement as main raw material, foaming agent, stirring after injection into the mold frame, static oxygen blowing after curing, cutting into a variety of specifications block or plate, by steam curing car into the autoclave in high temperature saturated steam curing condition, in the form porous light sand aerated concrete products.
The annual output of *****0 cubic aerated concrete equipment configuration table
A raw material processing section equipment.
1 jaw crusher 1 PE**0 * **0
2 Bucket Elevator 1 TD**0 * *3.*8M
3 pieces of ash storage tank 1 V = *0m3
4 spiral valve 1 **0 * **0
5 electromagnetic vibration feeding machine 1 Z3
6 ball mill 1 Φ1.2*4.5M
7 heads sieve 1
8 Bucket Elevator 1 DT**0 * *6.*8M
9 lime storage tank 1 V = *5m3
*0 screw conveyor 2 Φ**9*5M
*1 lime cement metering tank 1 V = 1.5m3
*2 cement storage tank 1 with cement tank set
*3 spiral valve 1 **0 * **0
*4 groove type conveyor 1 Units

Two mixing pouring process equipment.
1 aluminum mixer 1 V = 0.*4m3
2 fixed casting machine 1 sets of V = 3.2m3
3 slurry tank 1 V = 3.0m3
4 ferry car 1
5 pulp mixing system 2 **7(Φ2*2M)
6 of under 1 *5YZ****2
7 slurry mixing system 1 **9(Φ2*2M)
8 storage mixing system 3 **8(Φ4*5M)
9 slurry mixing system 1 **9(Φ2*2M)
*0 of under 1 *0YZ****0
*1 waste slurry mixing system 1 **9 (Φ2*2M)
*2 of under 1 *5YZ****2
*3 frame *6 and 4.2
*4 mold plate **0 4.2

Three cutting steamed section equipment.
1 steam boiler of 1 4T
2 waste slurry mixing system 1 **9(Φ2*2M)
3 of under 1 *0YZ****0
4 5T Lane 2 single Liang Shuang hook single hoist double speed
5 electric grab 2
6 turnover cutting machine 1
7 aerated autoclaved car *8
8 supporting rods **0
9 autoclave 4 Φ2**1M
*0 5T Lane 1 single Liang Dan hook single speed
*1 manual grasping Tools 1
*2 steering pulley 8
*3 traction machine 2 3T
*4 pump 1 0.9m3
*5 batching control system 1 set

Dust removal equipment four.
1 warehouse roof ESP 2
2 lime dust collector ( breaking, 1 sets of ball mill outlet )