Solutions for fire protection used brass parts

                                                               Combined melting furnace and holding furnace

Introduction and structure

Melting furnace and holding furnace are tied together. No smoke furnace itself while melting. Auto constant temp control unit is available. Widely used in the field of brass, copper alloy products.

Both furnace connect through bottom, raw material melted down, liquid can be flowed to holding furnace chamber after component of liquid met special requirement. We this design structure can reduce smoke, loss of zinc because of oxidizing. Energy consumption is less.

The **0kw,*5kw main frequency cored iduction furnace is composed by furnace body, inductor, cabinet, the inductor is installed under furnace body, include iron core, copper loop, coil, water jacket and so on.

**0kw melting furnace                                        *5kw holding furnace

Specification                                                                                  Specification

Model: **0                                                                                      Model: **0

Power: **0kw                                                                                Power: *5kw

Rated voltage: **0v                                                                      Rated voltage: **0v

Melting rate: **0kg/h                                                                    Output stream: 2

Working frequency: *0hz                                                             Working frequency: *0hz

Capacity: 1.6ton                                                                            Capacity: 2.5ton

Inductor: U type, single coil                                                         Inductor: U type, single coil

Quantity: 1 set                                                                                Quantity: 1 set

Introduction and structure

The casting machine is composed by pedestal, electronic motor, speed reducer, gears, pulling roller, screw down device, speed control system.

Die casting machine

Specification:

Model: SYO**0

Speed: **0.**5m/s

Casting diameter: ***0mm

Quantity: 2set

Introduction and structure

This cutting machine is suitable for fix length cutting(rod,pipe). It is made up of pneumatic system. Automatic cutting and unloading is available. The saw is welded  with hard alloy,can bear high temp. The saw can move along the guide rail. After finish cutting, the saw will be pushed back by air cylinder.

Pneumatic cutting machine

Specification:

Model: Q*0

Cutting size: ?***0mm

Speed: *0s/pcs

Power: 3kw

Working frequency: *0hz

Driver: pneumatic unit

Air pressure: **1 Mpa

Quantity: 2set

Intruction:

Using together with peeling machine, for stripping  the head of brass/copper rod,pipe before peeling.

Heading machine

Specification:

Model: CZ-C

Specification: ?*0

Heading diameter: ?8**0mm

Working length: *****0mm

Quantity of reamer: 4

Motor power: 4 kw

Quantity: 1 set

Application: for processing the oxidized surface of brass rod

Peeling machine

Main parameters:

Model: LG***0

Specification:  below ?45mm 

Working length: ***4m

Motor: *5kw

Hexagon,Square straightening machine (horizontal and vertical)   

Specification:

  Model: YT**2C

  Straightening size: S****0mm

  Precision: 0.2mm/**0mm

  Motor power: 5.5*5.5 kw

  Quantity: 1 set

Machining  processing:

brass billet slice cutting

   hot forging press

  CNC lathe

Finished products: