adhesive accelerator cleaning solvent gasket romover

Descripción del producto

**0 accelerator
Appearance Transparent to slightly hazy liquid
Fluorescence Positive under UV light
Viscosity Very low
Cure Not applicable
Application CA surface primer
  **0™ is used to make polyolefin and other low energy surfaces suitable for bonding with cyanoacrylate adhesives. On such treated surfaces the cured performance of cyanoacrylate adhesives is generally similar to that described in the TDS for the relevant adhesive. It is only recommended for difficult to bond substrates which include polyethylene, polypropylene, polytetrafluoroethylene (PTFE) and thermoplastic rubber materials.
***0 environmental cleaning agent
Chemical Type Hydrocarbon / Monoterpene blend
Appearance Colorless transparent liquid
Viscosity Very low
Cure Not applicable
Application Surface cleaner
***0™ is a non-aqueous, hydrocarbon based,non-CFC solvent designed for cleaning and degreasing of surfaces to be bonded with  adhesives. The product is used as a final pre-assembly cleaning treatment to removemost greases, oils, lubrication fluids, metal cuttings and fines from all surfaces to be bonded. It is designed to be used as a spray or in immersion cleaning processes at room temperature or heated
Polyolefin Primer is not recommended in assemblies where high peel strength is require.
C*-A cooper based anti-seize adhesive
Appearance Copper colored
Appearance (Material) Colloidal copper and petroleum grease present
Cure Non-curing
Application Lubrication
C*-A  Copper Based Anti-Seize provides a shield against high temperature seizing and galling. All mated parts, studs, bolts, flanges and gaskets, remove more easily and in cleaner and better condition. This product can be used on copper, brass, cast iron, steel, all alloys including stainless steel, all plastics and all non-metallic gasketing materials.
Typical applications include original equipment and maintenance, and equipment associated with petroleum chemicals, steel mills, power plants, marine and foundries.
This product  is  typically  used in applications  with  an  operating  range  of   **9 °C to ***2 °C.
Method of application:daub the adhesive on the surface of thread.
**7 silver based anti-seize agent
Product **7 is a heavy-duty, high-temperature antiseize thread compound applicable for heavy pressure applications.  
It can be used in high temperature areas up to ***0°C
TYPICAL APPLICATIONS
Product **7 is used to lubricate and to permit easy disassembly of assemblies exposed to high temperatures and heavy contact
pressures, such as boiler and oven parts, jet engines, and industrial turbines
***9
Chemical Type Copper salt and Aliphatic amine
Solvent Acetone
Appearance Transparent, green liquid
Viscosity Very low
Cure Not applicable
Application Cure acceleration of
anaerobic products
***9™ is used where increased cure speed of anaerobic products is required. It is especially recommended for applications with passive metals or inert surfaces and with large bond gaps.
***9™ is particularly recommended when prevailing temperature is low(<*0°C).
*8DA
Excellent permeability,fast action
Applied to loosen rusty and blocked bolts,nuts and pipe fittings.
Permeate rusty scale,water scale and carbon deposit. Lubricate and permeate rusty and blocked parts make them loosen.
**5
General-purpose industrial cleaning solvent.It removes all traces of oil and grease and leaves no residue.
It prepares surfaces for bonding with adhesives and is an excellent cleaning solvent for delicate instruments ,precision parts and controls.
**0
**0™ is a solvent formulation designed to remove baked-on chemical gaskets, gasket cements and conventional gasket materials from metal surfaces.
Product Features
**0™ is a chemical liquid that works to remove pre-cut conventional gasket cements as well as formedin-place chemical gaskets.
 
 **0™ is supplied in an aerosol which enables spray application on to intricate shapes with maximum penetration. Also, the product will not run off, even on vertical surfaces.
**0™ is ideal for removing:
●Baked-on gaskets and gasket cements from any type of metal surface.
●Chemical formed-in-place gaskets, including RTV silicone and anaerobic materials.
●Gaskets from aluminum components without scraping or damaging machine surfaces.
●Gaskets from small to difficult-to-reach components.
●High temperature engine paints prior to repairing.
●Built-up carbon deposits from interior engine/combustion surfaces.
●Baked-on grease and oil deposits (excellent pre-cleaner prior to solvent washing - keeps solvent baths cleaner,longer).
●Paint and varnish from wood surfaces (excellent for removing surface coating from delicate wood, carved surfaces without scraping or damaging surfaces)