Nylon 3D Filament 1.*5mm 3mm 1kg (2.2lb)/spool

we have ABS filament and PLA filament, HIPS filament, Nylon filament.

Standard Packing of  ABS filament and PLA filament, HIPS filament, Nylon filament. : 1kg/spool, we also accept custom-made.

Standard Color of ABS Filament and PLA filament: white, clear, balck red, green yellow, etc.

we have *1 colors in stock.

All Disonbor's ABS Filament and PLA filaments are Grade A.

Grade A: **0% virgin material.

Disonbor guarantee the ABS Filament and PLA filament quality.

we improved our production, now we also can do HIPS filament, nylon filament

ABS Filament and PLA Filament is commonly used in 3D printing, has the following characteristics:
(1) high strength, good toughness;
(2)density is small, when printing larger volume model lighter, save money;
(3) cost-effective, can be processed in wide range temperature;
(4) softer than PLA;
(5) diameter of 3.0/1.*5mm, variations + /*0.1mm,roundness +/*0.*5mm;
(6) 1 kg /plastic spool packaging, can be automatic feed;
(7) to be applied to a variety of 3D printer, Makerbot, Mendel, Prusa, Huxley, BFB series, etc.

Production Control

1.Produce process of ABS Filament and PLA Filament
I .  Before produce extruding filament ,we will dry ABS and PLA for a enough time (**5 hours).
II.  Mix with colors  masterbatch or colors powder, all which .certified with ROHS.
III.tollerance roundness +/*0.*5mm, each spool net weight 1kg+/*0.*5kg
IV we put all filament spool in shelf, different kind in different shelf, all categories arrange orderly.

2.Productiong quality control of ABS Filament and PLA Filament
I. we have diameter laser detect kits to control extruding rate on line, when diameter smaller or higher than accept range, the laser detect kits will adjust the extruding rate higher or smaller to make diameter range at acceptable.
II.keep each record filament samples sent to customers, build a tracking able document.
III.when the filament put on shelf longer than half a year, we will dry the filament again.

3.packaging of ABS Filament and PLA Filament 
We put each filament /spool on seal PE bag with desiccant , then smaller carton, then out big box
We also have vacuum heated bag to replace of  PE bag, make better avoid moisture.

4.research and developing
we have engineers that specialty in color formulation ,plastic modification, packaging, quality control ,producing control, we can do according to your requirements .

5. colors of ABS Filament and PLA Filament 
 Clear , Natural, white, black,red, sky blue,  dark blue , florescent green,  dark green, florescent yellow, dark yellow ,orange, purple, pink,  grey, brown, glow in dark, etc.

Order quantity from factory:
We have 3 to *0 tons in stock each month, about *****0kg of each kind .
when you can order one material(PLA or ABS), one  color (natural,white,black,red,green,yellow,orange,blue,purple, grey),one diameter(1.*5/3.0mm), minimum quantity **0kg, you can get the best factory price, you can start from natural,white,black, since these three colors are sold well.

Quality is a top priority! All of our products receive a full quality assessment as part of our production process. We run analysis on melt index, strength, elaticity as well as testing impact tolerances. We also have a full research and development department. This group is ready to modify/improve the properties of our standard products to match your company's specific needs.

Roundness Control of ABS Filament and PLA Filament

     At this month ,we are prounded to announce we had control the two direction dimension at very close ,make it round and diameter continuously ,at +/*0.1mm.

Diameter Continuance Control of ABS Filament and PLA Filament

    Control PLA and ABS filament diameter continuous, concern about the cooling water ,temperature is warm or cool, each plumbing flowing water temperature is stable the same or different ,etc, much factors will affect the diameter continuance.

  we build quality control system, that we buy 3D printer in office to test each produce batch filament, include PLA and ABS ,to make sure each one is qualify printing on 3D printer.

Other detailed information of ABS Filament and PLA 3D printer filament, please contact Disonbor Team, we will give you more detailed informations.

Disonbor guarantee the quality of ABS Filament and PLA 3D printer filament.

Exact data sheet of ABS Filament and PLA 3D printer filament,  please contact Disonbor team, we will send to you.

We have 3D printer, bulk order, before shipment, we will test them by our 3D printer.