Descripción del producto
Hybrid Stepping
Motor 1.8 Degree 2 Phase Stepper Motor for CNC
Router
Model:
*7BYGH*****1
Stepping motors are commonly recommended for
applications that are cost-sensitive and low maintenance. Steppers
provide stability and flexibility. This stepping motor is a hybrid
stepping motor for cnc router machine movement
driving.
Model:
*7BYGH*****1 (*2BYGH, *5BYGH, *6BYGH optional)
Stepping angle:
1.8°±5%
Voltage:
3.6V
Current:
3A
Phase: 2
phase
Max static
torque: *5kg/cm
Diameter for the
center shaft: 8mm or 6.*5mm
Net Weight:
1.1kg
Temperature Rise:
*0° Max
Ambient
Temperature: **0° ~**0°
Insulation
Resistance: **0 MΩ Min., **0VDC
Dielectric
Strength: *0Hz 1 Minute **0V Min
Shaft Radial
Play: 0.*2Max
Shaft Axial Play:
0.**0.3
Payment can be
made by Western Union, Paypal, T/T.
A stepper motor
is a brushless, synchronous electric motor that converts digital
pulses into mechanical shaft rotation.
Every revolution
of the stepper motor is divided into a discrete number of steps, in
many cases **0 steps, and the motor must be sent a separate pulse
for each step. The stepper motor can only take one step at a time
and each step is the same size. Since each pulse causes the motor
to rotate a precise angle, typically 1.8°, the motor's position can
be controlled without any feedback mechanism. As the digital pulses
increase in frequency, the step movement changes into continuous
rotation, with the speed of rotation directly proportional to the
frequency of the pulses. Step motors are used every day in both
industrial and commercial applications because of their low cost,
high reliability, high torque at low speeds and a simple, rugged
construction that operates in almost any environment.
There are three
basic types of step motors: variable reluctance, permanent magnet,
and hybrid.
Standard hybrid
stepping motors have **0 rotor teeth, or **0 full steps per
revolution of the motor shaft. Dividing the **0 steps into the **0°
of rotation equals a 1.8° full step angle. Normally, full step mode
is achieved by energizing both windings while reversing the current
alternately. Essentially one digital pulse from the driver is
equivalent to one step.
The stepper motor
driver receives step and direction signals from the indexer or
control system and converts them into electrical signals to run the
step motor. One pulse is required for every step of the motor
shaft. In full step mode, with a standard ***-step motor, **0 step
pulses are required to complete one revolution. The speed of
rotation is directly proportional to the pulse
frequency.
Standard hybrid
motors have **0 rotor teeth and rotate at 1.8º step angles. Because
they exhibit high static and dynamic torque and run at very high
step rates, hybrid step motors are used in a wide variety of
commercial applications including computer disk drives,
printers/plotters, and CD players. Some industrial and scientific
applications of stepper motors include robotics,cnc engraving
machine,cnc laser cutting machine,plasma cutting machine,machine
tools, pick and place machines, automated wire cutting and wire
bonding machines, and even precise fluid control
devices.
| País: |
China |
| N º de Modelo: |
57BYGH311-01
|
| Precio FOB: |
(Negociable)
Obtener el precio más reciente
|
| Lugar de origen: |
- |
| Precio de pedido mínimo: |
- |
| Cantidad de pedido mínimo: |
- |
| Detalle de embalaje: |
- |
| El tiempo de entrega: |
- |
| Capacidad de suministro: |
- |
| Tipo de pago: |
- |
| Grupo de productos : |
CNC Spare Parts
|
