Precio FOB
Obtener el precio más reciente57000 ~ 58000 / Unit ( Negotiable )
|1 Unit Minimum Order
País:
Turkey
N º de Modelo:
4 m³ Vacuum Road Sweeper
Precio FOB:
57000 ~ 58000 / Unit ( Negotiable )Obtener el precio más reciente
Lugar de origen:
Turkey
Precio de pedido mínimo:
57000 per Unit
Cantidad de pedido mínimo:
1 Unit
Detalle de embalaje:
As per customer requirement
El tiempo de entrega:
60 Days
Capacidad de suministro:
100 Unit per Month
Tipo de pago:
L/C, T/T
Grupo de productos :
Turkey
Persona de contacto Mr. Ihsan
Corum City, Corum
Technical
Specifications*4m3
1. General
Specifications
1.1. It will sweep both right and left side by the control of the
operator.(not simultaneously)
1.2. It will be able to brush the ground by spraying water against
dusting.
1.3. It is to empty the garbage tank by tilting the body
hydraulically.
1.4. Sweeping width will be ***0 mm (nominal).
1.5. Sweeping equipments will be driven by an auxiliary engine.
1.6. The auxiliary engine, fan, brushes and spraying equipments
will be controlled from the drivers cab.
1.7. The rear gate of the garbage tank will be opened/closed by
hydraulically.
1.8. There will be beacons (1unit in front*2 at the top side),
projector at both right and left side for night sweeping, and
direction lamps at the rear side of the body for safety of other
vehicles in traffic.
1.9. It will be possible to raise the body manually when
needed.
1.*0. The production of the sweeper will be suitable for highway
traffic.
1.*1. There will be a camera and monitor system for the operator to
examine the right side equipments of the truck.
2. Auxilary
Engine
2.1. Auxiliary engine will be diesel type, 4 cylinders.
2.2. It will produce *5 hp at min. at ***0 rpm
2.3. When the oil pressure decreases, it will be able to stop
itself automatically and if the temperature rises, the speed of the
engine will turn to idling by disengaging the fan
automatically.
3. Fuel
Tank
3.1. Capacity of the fuel tank will be **0 liters (nominal).
3.2. Trucks engine and the aux. engine will use the same fuel
tank.
4. Fan and
Drive
4.1. It will be made of carbon steel and have multi-vane and
self-cleaning type impeller
4.2. The fan impeller will be driven by the auxiliary engine via a
disc type clutch and gear box. The clutch will be of automotive
type for availability.
5. Aux. Engine
Room
5.1. It will cover the engine and fan during working.
5.2. It will be an integral of the body and raises with it, so that
the engine and the fan could be reached well.
5.3. In lowered position, there will be sealing to exclude all dust
from aux.-engine compartment. At the top of the engine room, there
will be vents, supplying clear air, for the use of aux. engine and
cooling of the room.
6. Suction
System
6.1. To reduce the noise of the suction unit, the fan room will be
isolated.
6.2. It will be carried by a couple of castor wheels and has the
feature of increasing the gap to the ground by drivers control.
6.3. The suction nozzle and the brushes will be able to rise up
together automatically at the reverse gear.
7.
Brushes
Sweeping will be performed by means of disc brushes located on both
sides and a cylindrical middle brush.
7.1. Side Brush(es):
7.1.1. The side brush will have *8 cm. in dia. at the tip and tines
are made of steel (may be made of
polypropylene if required).
7.1.2. It will be equipped by kick-back mechanism and the pressure
made by the brush to the ground is
pneumatically adjustable.
7.1.3. It will be able to work independently from middle brush.
7.1.4. Side brushes speed will be able to adjustable.
7.1.5. It will raise and lower by pneumatic cylinder.
7.1.6. It will have safety latch.
7.2. Middle Brush:
7.2.1. The middle brush will have **0 mm. dia. and polypropylene
tines and ***0 mm long.
7.2.2. To avoid conical wearing, the middle brush will have a
unique design. It will not be carried by the truck chassis
directly, but by a *-point bracket, 2 points of which are carried
by the axle of the truck.
7.2.3. It will be able to turn to the side swept automatically.
7.2.4. It will raise and lower by pneumatic cylinder.
7.2.5. It will have safety latch.
8. Water Tank
:
8.1. It will be made of stainless steel (AISI **4) integrally with
garbage tank. The water tank will be possible to enter in and clean
the mud in it thoroughly which is very likely to precipitate in
time, even the garbage tank is full with garbage.
8.2. It will have a volume of ***0 liters at min.
8.3. There will be a warning lamp and buzzer when the water level
in the tank is too low.
9. Watering
System
9.1. All of the watering parts will be made of corrosion proof
materials such as copper,brass,pig iron and plastic.
9.2. There will be a washing hose to clean the garbage tank.
9.3. The watering system on the brushes will be controlled by the
operator in the drivers cabin.
9.4. There will be at least *5 pieces of spray nozzles on the
brushes.
*0. Garbage
Tank
*0.1. Volumetric capacity of the garbage tank will be 4m3
(nominal). The floor will be made of stainless steel (AISI **4) and
the other sides will be made of carbon steel.
*0.2. The garbage tank floor will make an angle of *5 degrees at
least to the ground when raised.
*0.3. For the safety there will be a blocking valve on the
hydraulic system of the raising and lowering cylinder of garbage
tank.
*0.4. In the garbage tank, there will be a screen big enough to be
able to vent the air easily when preventing the sucked garbage to
go into the fan
*0.5. There would be a wandering hose flexible and easy to use of 6
inches in dia and ca. 4.5 meters in lenght at the rear part of the
sweeper .
*1. Electrical
System
*1.1. It will have *2 volt, 2 units flash lights at the rear bottom
sides of the body .
*1.2. For safety, there will be a main switch disconnecting all
electrical circuits on the superstructure when needed.
*2. Hydraulical
System
*2.1. It will work independently from the engine of the truck.
*2.2. The hydraulic circuit will be designed so that the hydraulic
pumps, motors and control valves will work together in harmony.
*2.3. The pressure will not exceed **0 kg /cm2 in anywhere on the
hydraulic system.
*2.4. There will be filters in enough sizes on suction and pressure
lines of the circuits.
*2.5. There will be an efficient system to cool the hydraulic
oil.
*3.
Painting
*3.1. The body will be sand blasted before the painting and then
will be primed and painted.
*4. Safety
Measures
CE regulations
País: | Turkey |
N º de Modelo: | 4 m³ Vacuum Road Sweeper |
Precio FOB: | 57000 ~ 58000 / Unit ( Negotiable ) Obtener el precio más reciente |
Lugar de origen: | Turkey |
Precio de pedido mínimo: | 57000 per Unit |
Cantidad de pedido mínimo: | 1 Unit |
Detalle de embalaje: | As per customer requirement |
El tiempo de entrega: | 60 Days |
Capacidad de suministro: | 100 Unit per Month |
Tipo de pago: | L/C, T/T |
Grupo de productos : | Vacuum Road Sweeper |