Products Features

4,8,*6 Class B Initiating Device Circuits (IDCs)

✓ All zones accept conventional detectors and any normally open contact device

 Four Class B Notification Appliance Circuits (NACs)

 One Form-A Alarm Relay

 One Form-A Trouble Relay

 One Form-A Supervisory Relay

 3.0 amps of system power

 Max *0 conventional detectors in one zone.

 Auto/Manual mode setting enable walk test.

 Each Zone can be disabled,

 Sound output can be disabled.

 Manual active sound output enabled.

 Able to report short and broken circuit of detection zones.

 Designed with standby batteries and space provision for two sealed lead-acid batteries.

 Testing and disable functions.

 Can connect max *2 repeater panels by RS**5 communication port

 Dimensions : *4.*7 " (*7 cm) long X *7.*2" (*4 cm) high X 3.*4"(*0cm).

 Weight: 6.6kg (without battery).

 

Specifications

 AC Power

*****0 VAC, *0 Hz, 2.3 amps

Wire size: minimum #*4 AWG (2.0 mm 2 ) with **0V insulation

Battery (lead acid only)

Maximum Charging Circuit: Normal Flat *—*@********************ximum Charger Capacity: *8 Amp Hour batter

Sound Output Device Circuits

General Alarm Zones 1 through *6

Operation: All zones Class B

Normal Operating Voltage: Nominal *4 VDC (ripple = **0 mV maximum)

Alarm Current: *5 mA threshold

Short Circuit Current: *2 mA maximum

Maximum Loop Resistance: **0 ohms

End-of-Line Resistor: 4.7K, ½ watt

Detector Loop Current is sufficient to ensure operation of two alarmed detectors per zone

Standby Current: 7.*6 mA

Three Relays Output

Relay contact rating: 2.0 amps