Descripción del producto
2 Pads Full Portable Body Massager Slimming Electric Slim Pulse
Muscle Relax Fat Burner
|
Name
|
Su mai tong
|
|
Model
|
JDK-ZL*2
|
|
Rated voltage
|
DC5V
|
|
Output frequency
|
1Hz****0Hz-
|
|
Temperature and Humidity(IN USE)
|
**0Celsius**0Celsius *0%RH**5%RH
|
|
Temperature and Humidity(store)
|
**0Celsius**0Celsius *0%RH**5%RH
|
|
Body Size
|
Length*5mm*Width*0mm*Thickness*2mm
|
|
Massage chip (Size)
|
Length*2mm*Width*2mm*Thickness1.1mm
|
|
Accessories
|
Wire(1piece)
Massage chips( one group of 2 pieces)
Product instruction
Certification
Warranty card
|
Stylish and compact, supply of mobile phone power, easy to use at
anytime & anywhere, relieve shoulder and shoulder pain.easy to
operate: hammering, massage, scraping, acupuncture, cupping,
massage and other six modes: any choice.
PRODUCT INTRODUCE :
Speed pulse (muscle massage machine) is a portable massage machine,
based on the principle of ergonomics, bioelectricity, and the
principle of modern medical meridian massage. Through the numerous
acupuncture points on the muscles of the human body, massage daily,
effectively promote the soft tissue blood circulation, reconcile
the blood and dredge the meridians. Effectively relieves muscle
fatigue, tight shoulders and stiff muscles.
Function Description:
1.
This product is a high - tech product for multi-functional healthy
whole body muscle. This product use microcomputer chip control
technology for humanized analog control .
2.
This product use the principles of ergonomics and bioelectricity,
integrates the modern meridians point massage, through the massage
for the all points of all body muscle , provides immunity and
oxygenation .achieves the health effect. Under the control of
microcomputer, it can give all human massages for the muscle parts,
quickly relieve the muscle pressure, fully alleviate the muscle
fatigue, recover the muscle contraction ability of the whole body,
and adjust the physiological elasticity of the muscle.
Function Description(NUMBER):
1.
The right side No.1 output power level with the left side NO.3
output motor form became a loop, and at the same time ,function
with the body ache part, output current, start massage dredge.
2.
The left side No.2 output power level with the left side NO.1
output motor form became a loop, and at the same time ,function
with the body ache part, output current, start massage dredge.
3.
The left side No.3 output the wire,connect with left side power
level .
4.
Master controller (main machine), control the intensity of massage
and display the massage mode.
5.
Main machine LCD display in six different modes.
6.
NO.6 output the wire,connect with No.3 right side power level
7.
NO.7 Output the Intensity adjustment
8.
NO.8 switch and mode selection
9.
NO.9 Micro-USB Plug wire,Connect the output terminal of the mobile
,and supply power for main engine.
USE WAY:
connect the massage chip with main machineconnect the phone with
the machine,if the machine will not open,thenopen the OTG fuctioon
first,also can open at setting open the patch side of the
massage chips,then stick it on the part you want to massage
(open the transparent film of the gel patch, as the photos, stick
the massage chips to the red part.)
operation: after *5 minutes will shutdown automatically
(strength plus or minus.total *5 types;
six different Frequency mode;
Open key, mode key: six modes ,short press way,if long press then
will shut down )
Massage chips' maintenance method
1.The adhesive surface of the massage chips should be kept clean,
avoid dust, oily substances, sticky substances and other
contaminants, otherwise the viscosity will decrease.
2. When the massage piece is dirty, it will make the viscosity
drop.or when the skin has a tingling sensation, rinse it with a
small amount of running water, and gently scrub with your fingers
for a few seconds. After drying thoroughly, it can temporarily
restore its viscosity. But if you use too much water, it will make
the viscosity drop.
3. Please do not use paper towels or cloth to wipe the adhesive
surface.
4. Please do not scratch the adhesive surface with nails, brushes,
etc. 5. Please keep out the space which children can no reach.
| País: |
China |
| N º de Modelo: |
JDK-ZL02
|
| Precio FOB: |
20 ~ 21 / Piece (Negociable)
Obtener el precio más reciente
|
| Lugar de origen: |
CHINA |
| Precio de pedido mínimo: |
20 per Piece |
| Cantidad de pedido mínimo: |
1 Piece |
| Detalle de embalaje: |
one radio , instruction manual, packing box |
| El tiempo de entrega: |
5 DAYS |
| Capacidad de suministro: |
100000 Piece per Month |
| Tipo de pago: |
PayPal, Money Gram, Western Union, D/P, D/A, L/C, T/T |
| Grupo de productos : |
radio
|
