Descripción del producto

1.Main Parameters:

2.Basic Configuration:

1).Wire section

Comprised  of  wire  frame,  walking  board,  white  water  pan,  forming  plate,  drainage  foil,  

vacuum  drainage  foil,  wet  suction  box,  suction  box,  breast  roller  support  and  lifter,  vacuum  

couch  roller,  wire-driving  roller,  wire-leading  roller,  compound  roller,  scraper,  spray  tube,  

slitter  edge  tail  cutter,  wire  tension  unit,  guide  and  starch  applicator,  etc.  longish  wire  is  

polyester forming wire and replaced in cantilever method. Jack is at the operating side, use jack  

which is applicable to load.  

Basic configuration can ensure making capacity of wires complying with product basis weight  

range,  adjust  dehydration  capacity  of  wires,  even  and  uniform  dryness  of  wet  paper 

2).Dehydration units in wire section

Dehydration units are configured according to max. basis weight and pulp type of the product,

can ensure paper-making capacity. When the basis weight of paper-making changes, can adjust

vacuum  degree  of  vacuum  dehydration  units  to  ensure  paper  dryness.  According  to  vacuum

degree  from  low  to  high,  configure  that  forming  plate,  drainage  foil,  vacuum  drainage  foil,

low-vacuum wet suction box, high vacuum suction box. Dehydrating units touching with wire

surface is made of ceramic, front part of wiper blade is flat and straight. Box body is made of

stainless   steel.   Each   vacuum   suction   box   is   equipped   with   steam/water   separator   and

connection with vacuum main tube.

3).Dryer section

The dryer are driven by closed gear box,all the bearings of dryer cylinders and the felt roll and bearing are lubricated by centrol thin oil station,

The dryer comprised of cylinder body, cover, spindle nose and access hole cover. Connect cylinder cover with spindle nose with split bolt. Cylinder cover is structured into two layers.

The dryer section has guide rolls.

3. After-sale technical service:

1). The company strictly obeys the requirements of equipment configuration and technique signed by both parties. Design and manufacture are in accordance with the National Industry Standard, and we guarantee that the equipment we provide is qualified product meeting the standards. 

2). After the contract takes effect, the company will begin to design and manufacture products within ten days, and finally we will make coordination, connection and inspection with our work during the installation and debugging; We reply the business letter within 8 hours. 

3). Installation and debugging should be in accordance with the time and period we have negotiated. 

4). Shelf life of the equipment is one year and wearing parts are not included. Shelf life of rubber covered roll is six months. Quality shelf life begins from the day when all goods are shipped to the customer and have been checked and received. 

5). In the quality shelf life, the company offers free service on related technique. If the equipment has quality problem caused by design or manufacture, the company will take its responsibility to change or maintain it. 

6). After the expiry of shelf life, the company offers lifelong technique service to clients, and provides them spare parts in favorable price and an express way. 

7). We are responsible for all producing technique, installation and debugging. We also offer training for workers, and we guarantee to teach them how to use it.