10A Solar Charge Controller CMP12

Descripción del producto

Only For off-Grid PV Solar System,LEAD-ACID battery.

For *2V Pv System: **0W Solar Panel,*2V Lead-acid Battery,*1V for Max Voltage
For *4V Pv System: **0W Solar Panel,*4V Lead-acid Battery,*2V for Max Voltage

Indicator LED

Package including:
1.1PCS *0A Solar Contorller
2.1PCS User Manual

Protection:
Overcharging protection
Can be used for all panels
Overdischarging protection
Short and Open Circuit protection
Full specification available if required
Fail Safe and cannot be damaged by accidental wiring mistakes
Advanced design with simple plug and play technology. No need for complicated adjustments

1.The Battery is being charged strongly when the Charge LED is lighting;Filckering means the battery is in floating charge Mode,if it`s off means charging stopped.
2.When the LOAD LED is lighting,it means there is output and load can work;if it`s off,there isn`t output and the load can`t work.

Introduction:
A solar charge controller is the controlling center of the PV battery in off-grid power system which makes use of solar cells array to protect your batteries from being over-charge and over-discharge, so the life span of it can be extended.

Features:
Function：According to the voltage of battery, Solar charge controller will adjust the charging current and decide if to supply power to the loads.
1. Generally keep the battery on full voltage condition.
2. Prevent the battery from over-charging.
3. Prevent the battery from over-discharging.
4. Prevent the battery from supplying power to solar panels during nights.

Data Sheet:
Output voltage:*2V *4V auto switch
Max load current: ≤*0A
Full charge cut:*3.7V
Low voltage cut:*0.5V
Temp ompensation:*3mv/℃/cell
Zero Load Loses:≤*0mA
Voltage Drop:<**0mv