Descripción del producto
Machine
configuration:
Power device: adapted servo motor to control
the car to walk/location and pulling power
control.
Near press machine P3 puller head: with *2
inch auto-saw to walk with tractor rail, saw
dia:φ**5mm,
motor power: 2.9kw.
Adapted Pulsed micro-lubrication system to
protected saw during cutting aluminum profiles, it has a good
protective effect on the cooling and lubrication of the saw
blade, making the saw blade more
durable.
During inital handling table cutting saw
walking section adopted hoist
roller.
During cutting, according to different
sections profiles it could set high speed/medium speed/low
speed/creep four cutting speeds.
Control way: 7 inch touch screen+data D/A
module+PLC+high perpormance controller+servo
motor.
Touch screen:
A. Set tractor pulling power, pulling power
range***0kg;
B. Set auto-saw cutting position, die
mouth&saw distance;
C. Set aluminum bar press quantity, eg.: set
it as 2 bars, when press machine finish press 2 bars, auto-saw
will cut profiles automatically, tractor back to receive
profiles;
D. Shows puller car and cutting saw
position, easy operation. When machine have errors, touch screen
will shows error alarm records, diagnostic
PLCs I/O
working situation, easy
maintanence.
DA Analog module: The MSR set in touch
screen, Through PLC processing, DA module output the
corresponding voltage value to the servo controller, to achieve
accurate torque control.
PLC: All the and output of the machine
are digitized by the programmable controller. CPU has a strong
capacity program memory, high-speed operation instructions, which
can ensure the rapid response to the extrusion process. At the
same time, it also accepts the operation procedures of various
extrusion modes.
Driving
controller: The latest generation of drive and
control system has the characteristics of high performance and
strong function. Its
corresponding servo motor adopts high resolution control, speed
response to achieve high speed, so it can carry out higher speed
and higher precision control. Also has the motor overheating,
overload, overspeed, motor blocking, motor over current
protection functions.It is used with the motor to ensure low
noise, low vibration, high efficiency, with speed feedback to
ensure reliable control precision, and realize the closed-loop
control of the motor and the
driver.
Traction type:
servo motor + pulley drive to make the car in the guide rail and
back traction
Tractioncar: beam,clamp,
saw cutting, and lubrication system, electrical system, walking
system, including an independent flying saw system. And with
lifting, clamping, several kinds of saw cutting, saw, pull away
placed; Clamping, arm retraction, and a series of related
actions
Traction speed: in the set torque is greater
than the aluminum speed range, the torque is constant and the
traction speed is always in sync with the
extrusion.
Traction power: adjustable
***0kg.
Back speed: average ****0meters/minute back
spped, max speed **0meter/minute.
Traction power: 2.9kw servo
motor
Clamping size: Width **0mm*height
**0mm
Traction rail: I-steel as
frame
Walking rail length: *2 inital handling
table**2meters/*8meters colded table, total length match about
*4meter/*0meter walking rail.
| País: |
China |
| N º de Modelo: |
1000T
|
| Precio FOB: |
25000 ~ 27000 / Set ( Negotiable ) (Negociable)
Obtener el precio más reciente
|
| Lugar de origen: |
FS |
| Precio de pedido mínimo: |
25000 per Set |
| Cantidad de pedido mínimo: |
1 Set |
| Detalle de embalaje: |
wooden case |
| El tiempo de entrega: |
15 days |
| Capacidad de suministro: |
10 Set per Month |
| Tipo de pago: |
T/T, L/C, D/P, Western Union, PayPal, Other |
| Grupo de productos : |
Double puller
|
