Aluminium Strip and coil Offer required

RFQ Details

ITEM 1: -



Strip Size 0.35mm x 30.0mm - Coil Id min 300mm /max coil weight 80kgs

Requirements for Pointer : 1 to 2 MT (Chennai). India



POINTER SPECIFICATION: Sheet thickness : 0.3+0.07mm

Raw material specification:- Al Mg3 - H18, EN AW - 5754 - H18, DIN EN 485-2

Sheet finish:- *One side RAL 9005 Coat, *Another side lacquer coat



Information about lacquer coat:-

1.Glass - level: Satin Finished

2.Harness of coat of lacquer : Scratch resistant

3.Top side of pointer provided with wash-primer, stove enameled

4.Cutting edges: Natural or in the colour of the top side of the pointer

5.Resistant to UV- Rays, higher air humidity,oils,atmoshere containing salt and sulphur oxide



DIALS SPECIFICATION:

ITEM : 2, 3 & 4(ITEM DIFFER IN STRIP SIZES)



Requirements for Dials : 1 to 2 MT each sizes (Chennai)

MATERIAL GRADE:- (ALCAN WG A5 6S H48 ) Al Mg 5.0 Mn

TENSILE STRENGTH:- 330-350 N/ mm 2

SHEET THICKNESS:- 0.4±0.03mm

Finish:- White polister lacquer RAL 9010

STRIP SIZE (TOL ±0.10MM):- 92.00 / 62.00 / 97.50 (1 to 2 MT)

1 to 2 MT



ITEM: 5



Requirements for Dials : 1 to 2 MT each sizes (Chennai)

MATERIAL GRADE:- ((ALCAN WG H5 4S H48 ) Al Mg 4.5 F32

TENSILE STRENGTH:- 310-330 N/ mm 2

SHEET THICKNESS:- 0.4±0.03mm

Finish:- White polister lacquer RAL 9010

STRIP SIZE (TOL ±0.10MM):- 97.50

1 to 2 MT





ITEM 6

Requirements for Dials : 1 to 2 MT each sizes (Chennai)

MATERIAL GRADE:- (ALCAN WG C45 - H44 ) Al Mn1 Mg0.5

TENSILE STRENGTH:- 175-215 N/ mm 2

SHEET THICKNESS:- 0.5±0.03mm

Finish:- White polister lacquer RAL 9010

STRIP SIZE (TOL ±0.10MM):- 150.00

1 to 2 MT



SURFACE FINISH REQUIREMENT:- FREE OF OIL, GREESE AND DUST ON BOTH SIDES, LAQUER - WHITE POLYSTER LAQUER , RAL 9010

LAQUER SPEC:- SMOOTH NOTCH AND SCRATCH RESISTANT POLYESTER LAQUER, ROLLED ON AND BURNT IN LIGHT - FAST AND TEMPERATURE RESISTANT UP TO 170 °C, PUNC