¿Aún no es miembro de TradeKey.com? Regístrese para conectarse con 9 millones de importadores y exportadores a nivel mundial.
registro |
BOOK A CALL
Book Call On Your Favorite Time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Contact Us
product
Prev
Guibao 661 Neutral Auto Lights Silicone Sealant
Next

Guibao 661 Neutral Auto Lights Silicone Sealant

|

- Minimum Order

País:

China

N º de Modelo:

-

Precio FOB:

Lugar de origen:

-

Precio de pedido mínimo:

-

Cantidad de pedido mínimo:

-

Detalle de embalaje:

-

El tiempo de entrega:

-

Capacidad de suministro:

-

Tipo de pago:

-

Grupo de productos :

-

Contactar ahora
Miembro Básico

Persona de contacto Nora

Chengdu, Sichuan

Contactar ahora

Especificaciones del producto

Descripción del producto

产品特性Product Feature

低挥发份

Low volatile compound.

 

固化后成柔韧的弹性体

Flexibleelastomer after curing.

 

单组分中性、室温湿气固化密封胶

Single component, neutral, cure at RTV(Room Temperature Vulcanization) sealant.

 

在**5℃~***0℃范围内使用性能稳定

Stable performance over**5 to ***0℃.

 

对金属、塑料、陶瓷及玻璃等多种基材具有优异的粘接性

Excellent adhesion to many substrates, such as metal, plastic, ceramic, glass etc.

应用领域Basic Use

车灯的防水粘接密封

Waterproofing sealant forautomotive lamps.

 

电子电器及通讯设备的粘接、防水密封

Waterproofing sealant for electrical and communication equipment.

 

汽车及船舶的挡风玻璃防水密封

Waterproofing sealant for windshield of automobile and ship.

 

其他高档灯具防水密封

Waterproofing sealant for other high-end lamps.

典型技术指标(实测值不应被视为产品标准使用)

Typical Properties (It should not be usedas product standard)















































 

固化前

As Supplied
技术指标

Property

 
测试标准

Test Standard
外观

Appearance
不流动膏体

Paste
目测

Visual Test
下垂度/mm

Sag/mm
0 GB/T ****7
表干时间(*3℃,*0%RH)/min

Tack Free Time (*3℃,*0%RH)/min
*0 GB/T ****7
固化后(7天,温度*3℃,相对湿度*5~*5%RH)

After Cure ( 7 days at temperature  *3℃, relative humidity *5%~*5% )
 

技术指标Property

 
测试标准

Test Standard
外观Appearance

 
弹性橡胶

Elastic Rubber
/
邵氏硬度/Shore A

Shore Hardness/ Shore A
*6 GB/T **1
拉伸强度/MPa

Tensile Strength/ Mpa
2.3 GB/T **8
断裂伸长率/%

Elongation at break/%
**0
 
 

颜色Color

硅宝**1中性硅酮粘接密封胶为黑色

guibao **1 neutral silicone adhesive sealant is available in black.

 

包装规格Packaging Information

硅宝**1中性硅酮粘接密封胶采用净容量**0ml支或*5kg塑料桶装或按客户要求进行包装.

guibao**1neutral silicone adhesive sealantis suppliedin cartridge(-net **0ml), or in plastic pail( net*5kg) , or in customized packing.

 

贮存条件Storage and Shelf Life

在*7℃以下的干燥通风阴凉处贮存。自生产日期计,贮存期为9个月。请注意产品包装上的生产日期。

This product should be stored below *7℃ in cool and dry places. Its shelf life is 9 months from the date of manufacture.

 

使用方法How to Use

表面处理Surface Treatment

基材表面需干燥、清洁,去除锈迹、灰尘和油污等

Keep the surface of substrate dry and clean, without any rust, dust orgreasydirt.

 

可使用的清洗溶剂包括酒精、丙酮等

Cleaning solvents include alcohol, acetone etc.

 

粘接Adhesion

对大部分基材良好粘接,除PTFE、PP、PE和类似材料外

Excellent adhesion to most substrates except PTFE, PP, PE etc.

 

将胶体用胶枪挤到已清理干净的表面,使之分布均匀

Extrude sealant with a sealant gun on cleaned surface appropriately and evenly.

 

如果灌胶位置较深,完全固化的时间将会延长;如果温度较低,固化时间也会延长

If this sealant is extruded into deep section, longer curing time will be expected. If the temperature is low,curing time will also be extended.

 

等离子处理Plasma Treatment

对于低表面能的材料如PP,需进行等离子处理

For low surface energy material(PP), plasma treatment is required.

 

底涂Primer

为达到最好粘接效果,建议使用硅宝特配的底涂

For the premium adhesion and seal performance, we suggest to use guibao primer.

 

利用溶剂处理基材表面,将底涂涂刷或喷涂在基材表面,形成一层薄膜

Use solvent to treat the surface of substrate, brush or spray the primer on the surface of the substrate to form a thin film.

 

底涂干燥5~*0分钟后,将密封胶涂在底涂表面,产生粘接

Let primer cure for ***0mins before applying the sealant.

 

特殊应用Special Application

特殊用途采用阴干、增湿、高温干燥等三个步骤进行处理,确保密封胶固化的稳定性

Allow primer drying in the shade, increase room moisture and room temperature to improve sealant curing process.

 

使用限制Limitation

材料表面低于4℃或超过*0℃时,不宜施工

When the surface temperature of substrate is below 4℃ or above *0℃, it is not suitable for sealant application .

 

不宜用于密不通风的场所、不宜用于连续浸水的地方、不能作为结构胶使用

Not suitable for confined spaces or on palces that continuously immersed in water, should not be used as structural glazing sealant.

 

不能用于喷有防雾漆的车灯密封

Not suitable for lamps sprayed with anti-fogging coating.

 

由于材料种类的多样性、批次间的差异性,可能会导致密封胶粘接性降低,施工前需进行粘接性测试。

guibaorecommends that adhesion test be carried out prior to sealant application. 

País: China
N º de Modelo: -
Precio FOB: Obtener el precio más reciente
Lugar de origen: -
Precio de pedido mínimo: -
Cantidad de pedido mínimo: -
Detalle de embalaje: -
El tiempo de entrega: -
Capacidad de suministro: -
Tipo de pago: -
Grupo de productos : -

Productos relacionados Chengdu Guibao Science&Technology Co.,Lt

Send a direct inquiry to this supplier

A:

Nora < Chengdu Guibao Science&Technology Co.,Lt >

quiero saber: