Descripción del producto

The CERIO CS****8G*8PX is a powerful and complying with IEEE **2.3af/at Power over Ethernet standard which provides DC *8~*7V Gigabit over Ethernet cables high-performance Gigabit Ethernet switch, with all 8 ports capable of *0/**0Mbps or ***0Mbps auto-negotiation operation  which means the switch could automatically negotiate with the connected partners on the network speed and duplex mode. It is ideal for micro-segmenting large networks into smaller, connected subnets for improved performance, enabling the bandwidth demanding multimedia and imaging applications. Moreover, the *0/**0/***0Mbps auto-sensing ability provides an easy way to migrate *0Mbps to ***0Mbps network with no pain.
The CS****8G*8PX supports 8 Port *0/**0/***0M Gigabit port Power over Ethernet (PoE+) allows you to expand your network via Ethernet cable to where there is no power line or outlet but where you want to fix devices such as APs, IP Cameras or IP Phones, etc.. No longer need to worry about the complicated cables and long distance which may cost you a lot of time and money. By integrating the data transmitting cable and power cord, it eliminates the effort constructing your network. Over current protection and circuit shorting protection are also supported to ensure the safety. It also support desk top and wall mounting for easy installation.
 
 
 
 
Highlight Features
 

• Complying with IEEE **2.3 *0Base-T, IEEE **2.3u **0Base-TX, IEEE **2.3ab ***0Base-T, IEEE **2.3af PoE ,IEEE **2.3at PoE+
• 8 Ports *0/**0/***0Mbps Auto-Negotiation Gigabit Switch, including 8 Ports PSE/ PoE+ function, complying with IEEE **2.3af/at standard
• Supporting the power up to *0Watt/*5.4Watt/ 7.5Watt/4Watt for each PSE/PoE+ port with bundle Power Adapter have*0Wattshare for 8 PoE ports
• Full/Half-Duplex capability on each TX port
• Supports Store & Forward architecture and performs forwarding and filtering
• Auto-learning networking configurations
• Supporting the flow control: back pressure for Half-duplex and IEEE **2.3x for Full-duplex mode
• Support Jumbo Frame 9K
• Non-blocking & Non-head-of-line blocking full-wire speed forwarding
• Supports TP interface Auto MDIX function for auto TX/RX swap
• Automatic Source MAC Address Learning and Aging
• Supports up to 4K MAC addresses
• Up to 1.5Mb bits buffer

• Standards & Hardware Specifications
  Network Standards Conformance
  IEEE **2.3 *0Base-T IEEE **2.3u **0Base-TX, IEEE **2.3ab ***0Base-T, IEEE **2.3x Flow Control IEEE **2.3af Power over Ethernet (PoE) IEEE **2.3at Power over Ethernet Plus (PoE+)
  Port Configuration
  8ports RJ**5 connectors for *0/**0/***0Mbps (With 8 Ports PSE/ PoE+ function )
  Media Access Protocol
  CSMA / CD
  Network Media
  *0BASE T: UTP Cat. 3 or up, **0BASE-TX: UTP Cat. 5 or up, ***0BASE-T: UTP Cat. 5 or up
  Transmission Method
  Store and Forward
  MAC Address Table
  4K
  Built-in Buffer
  1.5Mb
  Jumbo Frame
  9K
  Data Transfer Rate
  *0/**0/***0Mbps (Half-duplex), *0/**0/***0Mbps  (Full-duplex)
  Auto MDI/MDIX
  Yes
  LED Indicators
  Per Gigabit Port:(Link/Act): Status  PoE : Status  Per Unit: Power		x 8 x 8 x 1
  Internal Bus Speed
  *6Gbps
  Environmental& MechanicalCharacteristics
  Power Supply
  *0Watt External Power Adapter
  PoE Power Budget
  *0Watt shared for all PoE Ports
  Power Consumption
  2.8 Watt
  PoE Power Output
  Up to *0W per port
  Power Requirement
  DC In : Input Voltage: *8 ~ *7Volt
  Operating Temperature
  0° to *5° C
  Storage Temperature
  **0° to *0° C
  Operating Humidity
  *0% to *0% non-condensing
  Storage Humidity
  5% to *0% non-condensing
  Dimensions ( W x D x H )
  **0 x *5 x *5mm
  Unit Weight
  0.*6kg
  Case of Materials
  Metal
  Certifications
  FCC, CE, RoHS-Compliant
  Package Contents
  Contents
  CS****8G*8PXMain Unit Quick Installation Guide Booklet Power Adapter Warranty Card	x1 x1 x1 x1