Descripción del producto

Introduction:
The EN ISO ***2 Non-combustibility test is one of the series of Euroclass test standards.  This test specifies a procedure for determining whether or not a material will contribute directly to fire development and is relevant to classification of all building products (including floorings) into classes A1 and A2. 
 
Features:

1. Non-Combustibility Furnace measures incombustibility and combustibility of uniform building material and non-uniform building material of actual element. 
2. The evaluations (results) are rising temperature in the furnace, basic mass loss and ignition of specimen. 
3. Single Zone Furnace operable at up to **0 ℃ with the Kanthal Ribbon Heater.
4. **0±5℃ temperature automatically control by PID and Power controller.
5. Provided with stabilized voltage supply for more quick temperature stabilization.
6. Equipped with 3 thermocouples, for temperature in furnace, specimen center, and specimen surface respectively
7. **0 degree rotatable and height adjustable thermocouple scanning device;
8. Inner furnace thermocouple device to calibrate the temperature of furnace.
9. Testing results include Mass Loss(g) and Rate(%) ã€Ignition Time(s) and Sustained Flaming(s) ã€Initial & Maximum Furnace Temperature(℃) ã€Final Furnace Temperature(℃) ã€Maximum Specimen Center Temperature(℃) ã€Final Specimen Center Temperature(℃) ã€Furnace Temperature Rise(℃) ã€Specimen Center & Surface Temperature Rise(℃).

1. Electrical: **0V AC *0Hz / **0V AC *0Hz, *0A
2. Ambient Temperature: Operating *0°C to *5°C
3. Dimensions: **0 mm (W) x **0 mm (D) x ***0 mm (H)
4. Control Unit:**0 mm (W) × **0 mm (D) × **0 mm (H)