Descripción del producto

 

1. GSM/GPRS/SMS SIM card

Should be opened our call screening function, otherwise it can't normal use

2. Starting up

Open the sim card slot and insert sim card, the device will auto power on and it will enter standby state after 5 seconds.

3. Sound monitor

Call the device directly by your mobile, then you can monitor the sound around the device(during the monitoring the device itself dose not make any sound and light)

4. Real time tracking

Send ***9# to the device,then the device will reply a link of geographical location, check in the link you will see the location map.

(This product is A-GPS tracker, according to the local network, there is a certain distance error, this feature may be limited by local network lead to unusable)

5. Take photo to send MMS

Send ***8# to the device,then the device will reply a photo after hung up.

(In order to get ideal photos, please in advance to set the good angle for the camera)


6. Voice control callback

Send ***7# to the device, then the device will reply that Voice control callback has open. The device will call the master mobile when Voice around greater than *0 decibels.Close the function: Send***7##

7. Vibration alarm function

Send ***6#to the device, then the device will reply that the vibration alarm has open. It will alarm to the master mobile when the device has been moved and touched.Close the function:Send ***6##

8. Take video to send MMS

Send ***1# to the device, then the device will will reply you a video, Video recording time for *0 seconds.

(For the ideal video clips, please in advance to set the good angle for the camera)

9. Chinese-English shift

Send ***4# to the device, it will reply message in English (Setting OK)    

Send ***6#to the device, it will reply message in Chinese (Setting OK)

*0. Indicator light status

Starting up : The light will on and will off after 5s

Low power : The indicator light will flash.

The light has been lit when charging and will off after fully charged.

*1. Strong magnet

The machine itself with a magnet,don't need to worry aboutwhere to place it, as long as there is metal, you can put there directly, the magnet will automatically adsorption.

*2.Battery power display

Everytime positioning, the power will be display in the massage (BAT%)