I.Standard Accessory
1.Straightener adjustment adopts dial indicator.
2. Coil width is controlled by fast handwheel.
3. Pass line is adjusted by lifter driven by handwheel.
4. Please refer to TNCF series ***1 for No. 4 and after No. 4
.
II. Feeding feature by PLC program from
MITSUBISHI
1.NC Servo feeding. Operating with Computerize Numerical
Control by PLC program from MITSUBISHI made in Japan. The
electrical parts from YASKAWA made in Japan including Servo motor,
driver, encoder, interface screen and so on.
2.High precision feeding: to meet the coming of hi-tech
industry, controlled by computer closed circuit feedback system to
keep precision degree within +/*0.*5mm
3.Feeding function: *0 sets of different feed length, each
group provides **9 times for punching or cutting to satisfy
processing of special products.
4.High efficiency release device, match with adjustment of
signal from the cutter or press machine through cable wire.
5.Setting of feed length: directly feed length on the
control plate, and then it can reach needed distance, feed length
max ***9.*9mm. speed max **0m/min
III. Straightening feature.
Features
1.3 in 1 uncoiler and straightener saves space and increase
productivity.
2. Straightener and thickness adjustment by 4 worm gear
micro-adjuster withreading 0.1mm advance reference indicator.
3.Feed and straightener roll with a hard chrome plated.
4.High rigid mechanical design sturdy construction, and high
power output to secure proper straightening and feeding during the
speed increasing efficiency.
5.Electric loop control system.
6.Power hold down arm device
7.Inverse curve roll, easy to set up the curve up or down of
feeding exit direction.
8.Feeding line easily adjusted by advance worm gear screw
Jacks device
9.Coil Material Entry support Assembly can bring the material
into pinch rollers Automatically to save man power and increase
safety,
*0.Coil side guide
*1.Outgoing catenary to assist and support the material
*2.A Clusster gear set maximizes transmission of horse
power.
*3.Transforme
IV.Specification:
TNCF series