Descripción del producto
A. Functions
ï‚ GSM Quad-band frequency (Global use);
ï‚ Wide voltage range: DC ***4V;
ï‚ Build-in vibration sensor, Smart Anti-theft
(Optional);
ï‚ ACC ignition detection, vehicle status notification;
ï‚ External SOS , used in immergence case use;
ï‚ Build-in back up battery, support illegal main power
cut-off alarms (Optional);
ï‚ External Relay, used to cut off engine power or oil
remotely;
ï‚ External Microphone, used in voice monitoring case
(Optional);
ï‚ External Loudspeaker, used in phone calls or alarms case
(Optional);
B. Technical Parameter
ï‚ GMS frequency: **0/***0MHz or **0/***0MHz;
ï‚ GPRS: Class*2,TCP/IP;
ï‚ Voltage range: DC ***4V
ï‚ Standby Current: ≈0.2mA;
ï‚ Power Consumption: 0.5w/h;
ï‚ GPS initialization: Cold boot *8s (Open sky)
Warm boot
2s (Open sky)
ï‚ GPS Accuracy: *0m(2D RM);
ï‚ Working Temperature: *2℃ - **0℃;
ï‚ Working Humidity: *0%**0%RH;
ï‚ Dimension: *0.0(L)**5.0(W)**5.0(H)mm;
ï‚ Net weight: **3g;
C. Terminal Operations
1. Start-up/Shut-down
ï‚ Start-up: insert the SIM card, turn on back-up power
supply, the terminal will start up;
ï‚ Shut-down: disconnect power plug, take out the SIM card,
the terminal will shut down;
2. Terminal parameters settings
All beginning letters in each parameters’ commands
shall use upper-case letters, all punctuations shall be
English punctuation, only part of commands will reply.
By sending enquiry commands to the terminal,
corresponding contents will be replied.
Commands shall be sent by the bound cellphone
number.
ï‚ Cellphone SIM Card Number Binding
After the terminal start up normally, please bind
your cellphone number first, alarms will send to this bound
number.
Send SMS: *ZC+terminal password# Cellphone SIM card
number#Terminal SIM card number
Initial password is *****0, command start with *
e.g.: *ZC*****0#**********9#**********2
ï‚ Password Modification
Send SMS: *MP+Previous terminal password+new terminal
password (6 numbers)
e.g.: *MP***********4
Initial password is *****0, new password is
*****4
ï‚ Get Terminal Position by SMS
Send SMS: DW to terminal, it will reply the terminal current
geography location
e.g.: south east *0 meters, ABC company, Meilong Rd, Shenzhen,
Guangdong Province
ï‚ Google Address Link
Send SMS: GOOGLE to terminal, it will
reply the terminal current geography location link
Please note: the default time is Greenwich time, actual time needs
to add your time zone number
e.g.: enquiry time is *2:*0:*0, Chinese time is *0:*0:*0 (+ 8
hours)
Vibration Alarm
Send SMS: SF to turn on the vibration alarm
Send SMS: CF to turn off the vibration
alarm
ï‚
Engine Control
When the vehicle was stolen, the administrator can
send Cut-off Engine command via the live tracking monitoring
system, Under the conditions of safe driving, the command will
trigger the relay to cut off power of oil pump to stop the engine,
and it can’t be re-start the engine without restore engine
command.
To secure the safety of vehicle, the terminal shall in valid GPS
signal status, also speed under *0km/h or still status to cut off
engine.
After the theft alarm dismissed, send restore engine
command via live tracking monitoring system will trigger relay to
restore the power of oil pump, the vehicle will able to start
up.
Cut off Oil pump power
Send SMS: DY+password to terminal, and reply
config ok
Restore Oil pump power
Send SMS: TY+password to terminal, and reply
config ok
Intial password is *****0
e.g.: DY*****0,TY*****0
SOS Alarm
Any emergency case happens, press the SOS for 3
seconds, trigger the SOS emergency help alarm, the terminal will
call the bound cellphone number repeatedly, in nobody answers case,
it will ring max 3 times, at meantime, the terminal will upload SOS
alarm information to live tracking monitoring system.
Main Power Cut-Off Alarm
After the terminal main power been cut, it will
automatically trigger power cut off alarm, it will send a main
power cut off alarm SMS to bound cellphone, and meanwhile upload
the alarm information to live tracking monitoring system.
SMS e.g.: Alarm main power failure, please pay
attention!
ï‚ Voice Monitoring
Send SMS: JT to the terminal
The terminal will call back and the
administrator will able to monitor the voices.
ï‚
Phone Calls
Bound cellphone calls the terminal, after it
gets through, the administrator can talk with the driver via the
loudspeaker and microphone connected with the terminal.
D. Live Tracking Monitoring Platform
Language Available:
English, ä¸æ–‡, Español, Français, Português,
Deutsch, Vietnamese
If you already have an login account and password
information, you can login our platform directly, or please contact
your distributor and ask them to open you an account and provide
you the password.
Input the address link in your computer broswer,
the account and password, then login to your service
platform.
More information and service ,please contact with
me,thanks.
País: |
Hong Kong |
N º de Modelo: |
H01
|
Precio FOB: |
45 ~ 46 / Piece (Negociable)
Obtener el precio más reciente
|
Lugar de origen: |
- |
Precio de pedido mínimo: |
45 per Piece |
Cantidad de pedido mínimo: |
10 Piece |
Detalle de embalaje: |
carton, more information, please contact with me , thanks |
El tiempo de entrega: |
1-3 workdays |
Capacidad de suministro: |
1000 Piece per Day |
Tipo de pago: |
Western Union, T/T |
Grupo de productos : |
- |