Descripción del producto
CELdek®
****- *5 / Rder& ****- *5 evaporative cooling
padis used
in systems where high efficiency cooling is required. It can be
used for many different cooling purposes but is particularly
suitable for cooling of live stock buildings and greenhouses when
higher air velocity is required.
The Green stripe pad consists of specially
impregnated and corrugated cellulose paper sheets with different
flute angles, one steep (*5 deg) and one flat (*5 deg) that have
been bonded together. This unique design yields a cooling pad with
a high evaporation efficiency while still operating with a very low
pressure drop. In addition scaling is kept to a minimum and no
water carry-over occurs due to the fact that the water is directed
to the air inlet side of the pad. This is where most of the
evaporation takes place.
The impregnation procedure- for the
cellulose paper ensures a strong self supporting product, with high
absorbance, which is protected against decomposition and rotting
and therefore increascing longevity.
The distribution pad constitutes a vital
part of a complete system and should always be ordered in
combination with Rder& evaporative cooling pads. Placed on top
of the cooling pad it ensures a uniform supply of the water to the
cooling pad and minimises the risk of dry
spots.
The evaporative cooling
technology
Water is circulated through a pump station
and supplied to the top of the cooling pad via a distribution
manifold. A distribution pad on the top of the cooling pad ensures
an even water distribution. The water flows down the corrugated
surface of the Rder& evaporative cooling
pad.
Part of the water is evaporated by the
warm and dry air that passes through the pad. The rest of the water
assists in washing the pad, and is drained back to the pump station
through a gutter system.
The heat that is needed for the
evaporation is taken from the air itself. The air that leaves the
pad is therefore cooled and humidified simultaneously without any
external energy supply for the evaporation process. This is natures
own cooling process.
Equipment
High evaporation
efficiency
Superb wetting
properties
Low pressure drop when wet, leading to
lower operating costs
No water
carry-over
Low scaling
Self cleaning
Strong and self
supporting
Long life
time
Low running
costs
Quick and easy to
install
Environmentally
friendly
Consistant high
quality
Performance curves: The pressure drop
diagram shows the pressure-drop over the pad in the wet condition.
With the pad in a dry condition the pressure-drop is <*0% less.
There for there is minimal loss of air-flow when the pad is wet
compared to when it is dry.
Order Information Evaporative Cooling
Pads
Rder& ***0 - *5 - Height,mm - Width,
mm - Depth, mm (e.g., Rder&
*******************0)
Standard Heights: H = ***0,***0,***0 and
***0 mm
Standard Width : W = **0
mm
Standard Depths: D = **0,**0, **0 and **0
mm
Order Information Water Distribution
Pads
Rder& ****0 - 0 - Width, mm - Depth,
mm - Thickness,mm ( Rder®
*****************0)
Standard Width : W = **0
mm
Standard Depths: D = **0,**0, **0 and **0
mm
Standard thickness: C = *0 and *0
mm
Rder& is developed by Rdercorp and
marketed worldwide.
| País: |
China |
| N º de Modelo: |
5090/7090
|
| Precio FOB: |
110 / Bag (Negociable)
Obtener el precio más reciente
|
| Lugar de origen: |
SHANDONG |
| Precio de pedido mínimo: |
110 per Bag |
| Cantidad de pedido mínimo: |
1800 Cubic Foot |
| Detalle de embalaje: |
SHANDONG |
| El tiempo de entrega: |
7 day |
| Capacidad de suministro: |
1000 Bag per Week |
| Tipo de pago: |
T/T |
| Grupo de productos : |
Evaporative Cooling pad
|
